-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Design to Production Flow: DFT and Test Coverage Using Industry 4.0 Principles to Produce Good Products
December 1, 2021 | William Webb, ASTER TechnologiesEstimated reading time: 2 minutes
Achieving design for test (DFT) can be challenging for both design and test groups, as sometimes both expect that the other will be the one to manage DFT. The design and test groups might be in the same organization, or they could be an OEM vs. an EMS company. It works best if both the design and test groups are engaged in the process of DFT and trying to achieve the goal of the best test coverage and lowest rate of field returns.
Traditionally, design and test have operated in silos where there was not always the best communication, and at some point, the design was given to the test department to perform DFT. Often, due to project timelines and people working in different geographic regions, this means if some DFT concern was found, it may have been too late to address and resolve the issue. It is too late to wait until a board has gone through layout to begin DFT, as this needs to happen at the time of schematic capture, when the logic design is taking place, and before the board has gone for routing and layout. There are critical items that can be examined at the schematic capture phase to ensure that the board will be as testable as possible. A continuous feedback loop into DFT and test coverage understanding is key to producing defect free products at a minimum cost.
Companies must deliver good products to their customers, defect-free and at minimum cost. The challenge is how to detect or prevent defects from occurring so that only good products are shipped to the customer. Traditional DFT tools usually work only from the layout stage, which is too late in the whole process. Design data must be analyzed at the earliest stage possible in the product life cycle by importing schematic design data.
Electrical DFT rules violations should be identified and rectified prior to commitment to board layout, to prevent costly design re-spins. These rules can include standard and customer-specific checks relating to company requirements. With a centralized knowledge database, the same problems will never be repeated.
Test point requirements must also be identified pre-layout, during the schematic capture stage. This reduces the need for unnecessary test access, saving on PCB real estate, particularly on high density boards. The test strategy needs to be simulated, including any combination of inspection and test machines, delivering the highest test coverage. This unique combination provides electrical rules analysis, test point analysis, test strategy optimization, and test cost modeling based purely on schematic information. This, in turn, provides valuable layout guidelines that can be used to optimize the printed circuit board layout.
Once the PCBA layout is completed, a mechanical DFT analysis must be conducted to confirm the nets that require test access are not compromised by solder mask, component outline, adjacent probes constraints, etc.
To read this entire article, which appeared in the November 2021 issue of PCB007 Magazine, click here.
Suggested Items
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.