-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Balancing Talent and Procurement Challenges
July 27, 2022 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
Ron Preston, vice president of supply chain at Green Circuits, outlines the company’s specific challenges with high-mix work. While the company excels at turning around boards in just a few days, difficulties in supply chain, materials, and staffing remain ever-present. What is to be done and how is Green Circuits working its way through these issues? The answers might surprise you.
Nolan Johnson: Ron, we’re investigating the challenges of high density, and while we expected pick-and-place to be one of the challenges, we’ve heard a lot about unreliable consistency for component packaging and feeder technology, especially for the smaller components in combination with high-density boards. Do those two challenges line up with what you see?
Ron Preston: We’re dealing with a lot of quick turns and small, short runs. One of our problems is obviously with the supply being a challenge. We’re getting broker buys and going wherever we can to find parts. We don’t have the normal source of supply that you would expect. A year or two ago we would place orders with franchise distributors, and packaging would be very consistent. That’s not so much the case now.
Johnson: When it gets down to the manufacturing floor, you still have to get the boards put together and the components placed in the proper orientation regardless of what they were packaged in or how they’re oriented. In a short run environment, that adds to the challenge because there’s proportionally more setup that goes on. How do you respond to those challenges?
Preston: It’s very reactionary for us. We average about 150 customers a quarter. Now, multiply that times the number of SKUs or assemblies. Furthermore, those same 150 are not quarter over quarter. We have maybe close to 750 customers in our backlog right now. So, when you talk about the complexity and the variability, it changes quite a bit month over month, build over build, day over day. When we’re changing over lines, we must be nimble.
Johnson: As this work ebbs and flows, how do you respond? Is there potential in the current situation to start looking at the processes differently to be nimbler without a spike in labor hours?
Preston: That’s a good question. It does vary. It can be very labor-intensive depending on the type of packaging that we’re getting. One particular customer will literally bring us a bag full of parts, which requires a new level of work.
Johnson: You sort them out piece by piece, don’t you?
Preston: Yes, and you must figure out the polarity. Speaking of that, we recently had a case with a franchise part from a broker. The part was good, but it was marked wrong from the manufacturer. You don’t see that every day. We must pay closer attention and be more cognizant of what we get in and what goes on the green board.
Continue reading this interview in the July 2022 issue of SMT007 Magazine.
Suggested Items
Summit Interconnect Acquires Royal Circuit Solutions and Affiliates
05/07/2024 | Summit Interconnect, Inc.The combination solidifies Summit’s position as one of the largest privately owned printed circuit board (PCB) manufacturers in North America with a footprint that will now encompass eight manufacturing facilities.
Seeking Employment: Palash Pranav Vyas
05/03/2024 | Barry Matties, I-Connect007Despite skilled worker shortages across the industry, there are many educated and qualified individuals ready to contribute to electronics manufacturing. Here we profile Palash Pranav Vyas, a Ph.D. candidate at Auburn University whose work in drop shock reliability won him Best Student Poster at IPC APEX EXPO 2024.
Mycronic Releases Interim Report January–March 2024
04/18/2024 | MycronicNet sales increased 39 percent to SEK 1,692 (1,219) million. Based on constant exchange rates, net sales increased 42 percent.
NCAB Appoints Tim Benjamin as New CFO
04/15/2024 | NCAB GroupNCAB Group has appointed Tim Benjamin as its new CFO. Tim has a long and broad experience of managerial business finance roles, including M&A and IT.
TT Electronics Awarded Contract with Kongsberg Defence and Aerospace
04/11/2024 | TT ElectronicsTT Electronics, a leading provider of global manufacturing solutions and engineered technologies, announced today that its Fairford UK business has been awarded a new contract with long-standing customer Kongsberg Defence and Aerospace (Kongsberg) for the production of complex cable harness solutions.