Your In-depth Guide to Reducing Electronics Manufacturing Waste

Reading time ( words)

Waste is a common problem within the electronics manufacturing industry. Whether large volumes of faulty smartphones need recalling or small batches of complex PCB assemblies need reworking, waste can be time consuming and costly to rectify.

In essence, waste is a non-value adding process. If left unnoticed, it can damage reputations and, ultimately, lead to businesses becoming uncompetitive. The good news is there are a number of techniques that can help you identify processes that contribute to high volumes of waste.

In this guide, we introduce you to the principles of DMAIC, Six Sigma and Lean manufacturing, so that you can implement a suitable strategy to minimize your waste output.

What is Waste?

Waste can present itself in various formats but, in simple terms, it can be defined as a product or process that causes delay or defect. Keeping within these two categories, and according to Lean principles, waste (or muda) can be split into seven sub-categories:                        

1. Transport – this doesn't solely relate to the shipping of goods, it can also include other unnecessary transportation – i.e. moving people, products and information to places they don't need to be.

2. Inventory – the storage of parts, products, pieces or documentation awaiting appropriate processing.

3. Motion – people or equipment moving or walking more than is required to perform the processing.

4. Waiting – the downtime caused by waiting for the next production step - for example, during shift changeover or delayed receipt of vital parts.

5. Overproduction – production ahead of demand.

6. Over processing – relying on inspection to catch issues rather than designing the process to eliminate problems upfront.

7. Defects – rework, scrap, incorrect documentation, etc.

It is important to note that these seven categories are not exhaustive. Other forms of waste have been identified, such as manufacturing goods or services that do not meet customer demands or needs and the under-utilization of skills. By identifying these traits within your own manufacturing facility and then implementing suitable process changes, it's possible to start seeing significant reductions in your waste output.

Techniques that can Help You Identify Waste

DMAIC (project management)

DMAIC is a data-driven processing tool that allows you to logically format an issue and plan around its continuous improvement. The tool demands you break down a problem and then adopt a solution in one logical flow. Each point within the acronym stands for a stage within the process. By following the stages chronologically, identifying wasteful processes and implementing improvements soon become accessible and measurable:

  • Define the problem, improvement activity, opportunity for improvement, the project goals, and customer (internal and external) requirements.
  • Measure process performance.
  • Analyze the process to understand the causes of poor performance.
  • Improve process performance by addressing and removing the cause.
  • Control the improved process and monitor future performance.

Within the measure (M) and analyse (A) stages of a DMAIC project, Lean manufacturing and Six Sigma strategies are generally implemented to gain the best possible outcome. Lean manufacturing is a model armed with tools that aim to simplify and streamline a process in order to eliminate delay. In turn, Six Sigma is a methodology aimed at optimising and stabilising a process in order to eliminate defects.

Six Sigma (Optimizing and Stabilizing a Process)

Six Sigma focuses on optimizing and stabilizing a process in order to minimize defect levels. Some of the tools that encompass this methodology include control charts, Pareto charts and histograms:

Control chart

Control charts are a statistical process control (SPC) tool that are used to show whether or not your manufacturing processes are in a state of control. The graph uses collected quantitative data from a particular process, which is inputted to collate a base line performance. A realistic target line, derived from your current business position and future targets, is then inputted on top of this. It is then possible to see whether the process is reaching, exceeding or failing to meet your businesses targets. If you regularly miss the target it may be worthwhile re-evaluating your current process using one of the process improvement tools highlighted in the next section of this post.

Pareto chart

This data analysis chart combines both bar charts (individual values in descending order) and line graphs (cumulative total) in order to show which variables contribute most to a process issue. By identifying a defect and investigating the data you can then use a Pareto chart to highlight your findings. A Pareto chart can often identify the most common source of defect, or even the highest occurring defect, both of which are likely contributors to a high waste output. By analyzing your data successfully in this way you can look at ways to combat these problems and, ultimately, lower your manufacturing waste.


A histogram is a step-column chart that displays a summary of the variations in (frequency distribution of) quantities (called classes) that fall within certain lower and upper limits in a set of data. Like Pareto and control charts, a histogram is another way to display data in order to identify harmful variances within a process that could be increasing your waste levels. Being aware of these analytical tools can help identify triggers of waste within your business and make the improvement process smoother and easier to integrate into production. In turn, they can help lower costs and improve efficiency, while returning your focus back to manufacturing quality products on a consistent basis.

Lean Manufacturing (Simplifying and Streamlining a Process)

5S, spaghetti diagrams and process mapping are all examples of improvement tools that have the primary intention of streamlining and simplifying a process in order to eliminate delay (a key contributor of waste) within your manufacturing process.


The 5S system is an approach to organizing and standardizing an area to ensure it is optimized for maximum efficiency. By following the five steps, derived from the philosophy of Kaizen, it is possible to minimize the amount of waste an area within your manufacturing facility outputs.

The five stages are:

1. Being organized is key to minimizing waste. By sorting the work area and throwing away anything that doesn’t add value, it is easier to notice problems and address them with solutions.



Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 3

04/22/2021 | Brent Fischthal, Koh Young America
Initiatives like the IPC Connected Factory Exchange (CFX) and IPC-Hermes-9852 underpin efforts within the industry to develop standards and help create a smart factory. These M2M communication standards, guided in part by Industry 4.0, are altering the manufacturing process by improving metrics such as first pass yield and throughput by applying autonomous process adjustments.

This Month in SMT007 Magazine: The Skilled Worker

01/05/2021 | Leo Lambert, EPTAC
Why do we train and educate our employees? Here, I will share my perspective based on what is happening in facilities trying to outsource their products, as I see that many companies are losing the tribal knowledge of how things are manufactured and the basic skills necessary to physically build a product.

Lorain County Community College’s Successful MEMS Program

12/07/2020 | I-Connect007 Editorial Team
The I-Connect007 editorial team had the pleasure of an extended and detailed conversation with Johnny Vanderford and Courtney Tenhover from Lorain County Community College (LCCC). Vanderford and Tenhover are at the heart of the microelectromechanical systems (MEMS) program at LCCC that is emerging as a model for a successful technical higher-education program. This conversation was lively, and the enthusiasm at LCCC is infectious, as it should be; their results are impressive.

Copyright © 2021 I-Connect007. All rights reserved.