Indium to Present at China Semiconductor Packaging Test Symposium 2017


Reading time ( words)

Indium Corporation’s Leo Hu, Area Technical Manager, will present at the China Semiconductor Packaging Test Symposium (CSPT) on June 21-23 in Jiangyin, China.

Hu’s presentation, "Challenges in Materials Application for SIP", will detail the solder paste characteristics required to achieve consistency in fine-feature printing using types 6 and 7 solder pastes. The presentation will also detail how to minimize bridging caused by the small gap between two adjacent pads, thus improving production yield.

Hu is based in Suzhou, China, and has more than 12 years experience in semiconductor packaging. He is a veteran in advanced assembly technology development, process improvement, and assembly materials application. He has served in many roles at top 10 outsourced assembly and test (OSAT) companies, including Process Engineer, Project Engineer, Senior R&D Engineer, and Chief Engineer. Hu earned a bachelor’s degree in electronic information science and technology from Nankai University, Tianjin, China.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

Share

Print


Suggested Items

Meet Christine Davis, I-Connect007 Columnist

12/23/2020 | I-Connect007 Editorial Team
Meet Christine Davis, one of our newest columnists! Christine will share her expertise and lessons learned through her journey as one of the few women in the electronics industry to found and run her own company.

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

What Is Digital Twin Technology, and Why Is It So Important?

09/09/2020 | Happy Holden, I-Connect007
Happy Holden describes how Siemens' 12-part webinar series, “Implementing Digital Twin Best Practices From Design Through Manufacturing,” is an excellent series designed to educate the electronic manufacturing engineer on the progress of using a digital thread to improve products and performance.



Copyright © 2021 I-Connect007. All rights reserved.