Lenthor Engineering Boosts Speed with Fuzion Platform from Universal


Reading time ( words)

Lenthor Engineering, a California based designer, manufacturer and assembler of flex and rigid-flex printed circuit boards, has recently invested in a new Fuzion Platform from Universal. The dual-beam Fuzion 2-37 is a high performance multi-function solution that when added to Lenthor’s existing line will greatly boost production speed.

The Fuzion platform leverages the latest generation of head and feeder technologies and software tools and maximizes flexibility, effectiveness and productivity, at high volumes, without limitations. It will reduce setups, increase output, streamline changeover and promote a lean environment with smaller lot sizes, reduced WIP and increased turns,

“We’re excited about the possibilities this new platform brings to our assembly line, specifically when it comes to speed. The Fuzion will allow us to place an additional 35,000 components per hour,” says Matt Kan, Lenthor Engineering’s Assembly and EMS Director. 

Share

Print


Suggested Items

Meet Christine Davis, I-Connect007 Columnist

12/23/2020 | I-Connect007 Editorial Team
Meet Christine Davis, one of our newest columnists! Christine will share her expertise and lessons learned through her journey as one of the few women in the electronics industry to found and run her own company.

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

What Is Digital Twin Technology, and Why Is It So Important?

09/09/2020 | Happy Holden, I-Connect007
Happy Holden describes how Siemens' 12-part webinar series, “Implementing Digital Twin Best Practices From Design Through Manufacturing,” is an excellent series designed to educate the electronic manufacturing engineer on the progress of using a digital thread to improve products and performance.



Copyright © 2021 I-Connect007. All rights reserved.