Scienscope to Display Three New Systems at IPC APEX EXPO 2019


Reading time ( words)

Scienscope International will display three new systems in booth #441 at the 2019 IPC APEX EXPO, scheduled to take place January 29-31, 2019 at the San Diego Convention Center. To further establish the company as the leader in automated X-ray component counting, Scienscope will debut the AXC-800 II component counter that features automatic internal bar code scanning to eliminate the use of an external bar code reader. 

Also on display will be two systems that take a novel approach to the realities of component counting and inventory management – the AXC-800 7" and the automated AXI-5100 7".  The systems specifically address the reality that 7" reels are by far the dominant category of SMT inventory, and are designed to address that fact by being dedicated to what is counted most often – 7" reels. The new systems will help define the component counting category by offering the lowest cost available for companies to begin accurate component counting.

“System automation and the reduction of manual steps for operators are key goals as we look towards the factories of the future,” stated Don Jeka, National Sales and Marketing Manager. “Scienscope has aligned our product development to continue to focus on these goals. We are proud of our steps forward in this area, and we look forward to attendees at the IPC APEX EXPO seeing the new AXC-800 II and our AXI-5100C II series on display in booth 441, both offering the highest levels of automation available in their market segment. With the addition of our 7" series systems, Scienscope offers the best value to price point component counting available in the industry. Inventory control and management, which includes accurate component counting, are absolutely critical elements as we look towards the modernization of material handling in our industry.”

Scienscope also will have its well-established line of microscopes, video measurement and metrology systems on display in the booth at the 2019 IPC APEX EXPO.

About Scienscope International

Scienscope was founded in 1994 to meet the growing need for reliable and affordable general-purpose optical and video inspection solutions for the electronics and PCB industries. The company began with basic stereo zoom microscopes used for SMT inspection and rework of circuit boards and electromechanical assemblies with a commitment to quality, value and support. Over the past 25 years, Scienscope has evolved to become a complete inspection solution provider, offering both offline and inline X-Ray systems, Video coordinate measurement systems, Video inspection systems, and microscopes to meet a wide variety of applications and manufacturing quality requirements.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 3

04/22/2021 | Brent Fischthal, Koh Young America
Initiatives like the IPC Connected Factory Exchange (CFX) and IPC-Hermes-9852 underpin efforts within the industry to develop standards and help create a smart factory. These M2M communication standards, guided in part by Industry 4.0, are altering the manufacturing process by improving metrics such as first pass yield and throughput by applying autonomous process adjustments.

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/14/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.



Copyright © 2021 I-Connect007. All rights reserved.