Invotec Expands International Presence with New Facility in Germany


Reading time ( words)

Custom equipment provider Invotec opens Invotec GmbH, a facility in Villingen-Schwenningen serving medical device manufacturers across Europe. 

Invotec was started in Dayton, Ohio and has been helping medical device manufactures around the globe solve complex assembly, test, and inspection challenges for over 25 years. After joining the HAHN Group in 2017, Invotec is expanding its international presence with a new location in Villingen-Schwenningen, Germany.

“Southern Germany is a long-standing hub for medical technology as well as automation across Europe,” says Armin Doser, CEO of Invotec GmbH. “With our experience in medical device manufacturing, we want to show our commitment to growing and serving this region as well as our existing international customers.”

Invotec’s new facility is 730 m2 (7858 ft2) and will provide a range of solutions from semi-automated stations to full production lines. “In the US, we are known for helping medical device manufacturers determine the right level of automation to improve production while maintaining quality. This is the experience I am most looking forward to bringing our customers internationally,” says John Hanna, CEO of Invotec.

As part of the HAHN Group, Invotec GmbH is supported by a network of companies specializing in automation and robotics. Together, the group has 20 subsidiaries across 12 countries. Invotec GmbH focuses on applications in the medical device industry and provides customers complete equipment solutions from engineering and design to production, installation, and service. Located close to sister companies such as Waldorf Technik, the synergy of the HAHN Group and the opening of Invotec GmbH will give medtech companies access to a global network of automation best practices and support.

About Invotec

Invotec designs and builds custom assembly, test, and inspection equipment for medical device manufacturers. We specialize in applications with small-to-medium-sized components and complicated assembly processes—providing a range of robust, reliable, fully-automated and semi-automated solutions. Our flexible approach allows customers to refine their product design while we engineer the equipment. Our technical capabilities include: complex assembly equipment, controls engineering, error proofing, machine vision systems, mechanical assembly systems, micro laser processing, precision joining, and test systems.

About the HAHN Group

The HAHN Group consists of a network of specialized companies for industrial automation and robot solutions. With its own production sites in China, Czech Republic, Croatia, Germany, Great Britain, India, Israel, Mexico, Switzerland, Sweden, Turkey, and the USA, the group currently employs approx. 1,300 staff at 20 locations. Well-known customers from the automotive, consumer goods, electronics, and medical technology industries benefit from the HAHN Group’s 30 years of expertise and automation know-how.  

Share

Print


Suggested Items

Meet Christine Davis, I-Connect007 Columnist

12/23/2020 | I-Connect007 Editorial Team
Meet Christine Davis, one of our newest columnists! Christine will share her expertise and lessons learned through her journey as one of the few women in the electronics industry to found and run her own company.

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

What Is Digital Twin Technology, and Why Is It So Important?

09/09/2020 | Happy Holden, I-Connect007
Happy Holden describes how Siemens' 12-part webinar series, “Implementing Digital Twin Best Practices From Design Through Manufacturing,” is an excellent series designed to educate the electronic manufacturing engineer on the progress of using a digital thread to improve products and performance.



Copyright © 2021 I-Connect007. All rights reserved.