IPC Webinar on Production of Electronic Hardware with the Assistance of IPC Standards


Reading time ( words)

IPC invites the industry to an informative and entertaining two-part webinar series held by distinguished instructor and standards expert, Lars Wallin, IPC Europe Representative.

The series, Production of Electronic Hardware with the Assistance of IPC Standards, has been appreciated by thousands of attendees active in the electronic hardware production chain in many European countries. The webinars explain how IPC standards are developed and guide you through the entire production chain of PCBAs.

The webinars demonstrate how rework costs can be reduced and quality can be improved by using the appropriate IPC standards at each stage of production.

For more information or to register, click here.

Share

Print


Suggested Items

Book Excerpt: The Printed Circuit Assembler’s Guide to Process Validation

12/24/2020 | Graham Naisbitt, Gen3 Systems
It is assumed that readers are familiar with manufacturing electronic circuit assemblies in accordance with IPC-J-STD-001 or IEC 61189-1; both are titled “Requirements for Soldered Electrical and Electronic Assemblies.” In October 2018, IPC-J-STD-001 Revision G was amended and released with a new Section 8 of the document titled “Cleaning.” The change was primarily the removal of a “cleanliness” level of 1.56 mg/square cm of NaCl equivalence. This small change has great significance in relation to how companies ensure the electrochemical reliability of their products.

TQM: The Tyranny of the Urgent

06/10/2020 | I-Connect007 Editorial Team
The I-Connect007 editorial team recently spoke with Dr. Ron Lasky about what’s stopping companies from improving their processes, especially regarding productivity.

Maximising Performance and Reliability of Automotive Electronics With Conformal Coatings

11/20/2019 | Phil Kinner, Electrolube
While the value of the electronic systems in a modern vehicle typically exceeds 20% of the total vehicle cost, many estimate that this value will exceed 35% within the next five years. With the increased adoption of electronic vehicles and the development of the internet of things (IoT)—which has brought us driverless cars like those being tested by Google in California and BMW on the roads of Bavaria—the future of this industry is starkly different from that of the 1970s when electronic fuel injection systems were first introduced to mainstream production.



Copyright © 2021 I-Connect007. All rights reserved.