Real Time with...SMTAI 2020: MacDermid Alpha’s Single-Step Metalization Paper

Reading time ( words)

Nolan Johnson talks with MacDermid Alpha Electronics Solutions about a new process for filling through-holes with copper in a single step. Carmichael Gugliotti, the primary author and an applications specialist, and Richard Bellemare, director of electrolytic metalization, address why this new process matters and what’s in Gugliotti’s technical paper presentation for SMTAI.

Nolan Johnson: Nolan Johnson here for virtual Real Time with… SMTAI, and today. I’m talking with MacDermid Alpha’s Carmichael Gugliotti and Rich Bellemare. Carmichael is a metallization application manager, and Rich is the director of electrolytic metallization. Our topic is the paper that you’ve submitted to SMTA International, the technical conference, titled “Single-Step Metallization Process for Filling Through-Holes With Copper.” Let’s start with why that matters.

Carmichael Gugliotti: Thanks for having me, Nolan. There are two main things that we use the single-step through-hole fill process for. One of them is for thermal management, and then the other big one is for any layer. It makes a much more solid base to build up layers after that initial inner layer is created on the circuit board.

Johnson: What sorts of fabrication applications lend themselves to this? Where would this be a concern for the fabricator?

Rich Bellemare: Primarily, where this would fit in is the couple of segments that Carmichael had mentioned. For the core layer of through-hole filling, this is targeting the IC substrate market, where you’re looking to have very stable, flat surfaces in that core layer upon which to build further layers. This is critical to densify circuitry. The other one is in the thermal management, where you’re targeting some of the thicker types of panels—such as the LED market, where you’re trying to draw the way from actively heat-generating components—forestalling their life and making the whole system more reliable.

Johnson: Is it a fair representation for me to say that really you’re looking at making a planar a surface as possible?

Gugliotti: Yes, that’s a big part of it. The single-step process is one of the best we have now for creating a flat surface across the entire circuit board, rather than just having these holes that have these big dimples that we’re really struggling to build on.

Bellemare: There’s a lot of disadvantages nowadays with the way through-holes are filled. A lot of them were done with DC plating or plugging with paste and planarizing. All these things add a lot of extra steps, and a lot of extra copper needs to be dealt with later on in the fabrication process.

Johnson: Walk me through the research. You got started on this specifically looking for a single-step process, or was this just a result of the work you were doing?

Gugliotti: Yes, we started off initially with a DC process, which really worked well for thin boards. But as boards got more difficult, they got more holes on them, or they got thicker. It really was kind of limited. Either it took an excessive amount of time, or the capability just wasn’t there. We got lots of cavities.

We then moved into a two-step process and were working with that for a little while, but then you have a lot of equipment. You have a lot of taking the panels in and out of tanks, moving them around. This process kind of combines the best of both worlds. It has a pretty wide availability, can use a lot of different through-hole sizes and panel thicknesses, and can all be done in this single-step process.

Johnson: What was key in getting from a two-step process to the single-step process?

Gugliotti: The big addition is we have a novel leveler that we added into our single-step process, and this allows us to keep that bridge capability we had initially, fill those vias, and make that flat surface on the profile of the hole.

Johnson: This is an application obviously that has a place in the market. Who’s your target customer for this? And is this available for production type customers now?

Bellemare: Yes, it is available as a production process. It’s a process that’s just being released into the marketplace. Again, our target initially is more for the IC substrate to simplify the manufacturing process and give the process the biggest capability possible. We’re going with the single-step through-hole filling process.

Johnson: In this conversation, we’ve talked both about board and about IC substrate. Help me connect the dots there for you. Is this something that fits both in on the IC side and the PCB side?

Bellemare: This is the IC substrate, as far as the organic substrate that you’re attaching the dies to. The IC substrate dies, you’re attaching those to the organic substrate, which is what we’re calling the IC substrate. What’s important there is densification of circuitry, as you’re trying to keep these organic substrates as thin as possible. It all goes into keeping as little surface coppers possible when you plate and being able to fill these holes without the need for planarization. Because as all these dimensions become tighter and tighter, you can’t use mechanical planarization anymore because of registration issues and feature sizes of an IC substrate.

Johnson: Great. Thanks, gentlemen. That has certainly been enlightening. I look forward to catching your presentation, Carmichael, at the SMTAI technical presentations. It’s one I’m excited to find out more about, as will the rest of our readers. Thanks for taking the time to talk with me.

Gugliotti: Thank you.

Bellemare: It’s our pleasure.

Johnson: Nolan Johnson here for Real Time with… SMTAI.

View more show-related content at Real Time with… SMTAI 2020 virtual.

I-Connect007 continues to deliver original reporting and coverage of the electronics design, electronics manufacturing, and contract manufacturing industries, including up-to-date information from the companies, associations, and supply chains globally. Find the latest news and information at



Suggested Items

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.

Copyright © 2021 I-Connect007. All rights reserved.