CyberOptics Receives Orders Valued at $4.2 Million for 3D MX3000 Systems


Reading time ( words)

CyberOptics Corporation has announced that it recently received orders valued at $4.2 million for its 3D MX3000™ memory module inspection systems for multiple subcontractors of a large memory manufacturer. These systems are expected to be recognized as revenue evenly in the second and third quarters of 2021. We believe these large orders affirm the importance of 3D MRS™ technology-based MX3000 inspection systems for memory manufacturers.

As previously disclosed, the gross margin percentage of the 3D MX3000 is lower than that of its 2D counterpart, reflecting the 3D system’s significantly higher content of material handling and automation hardware. These orders will be positive for earnings, however, they are expected to reduce the company's gross margin percentage by one to two points on an annualized basis, given current levels of sales and gross margins.

CyberOptics will release its operating results for the fourth quarter of 2020 in the second half of February 2021.

About CyberOptics

CyberOptics Corporation is a leading global developer and manufacturer of high-precision 3D sensing technology solutions. CyberOptics’ sensors are used for inspection and metrology in the SMT and semiconductor markets to significantly improve yields and productivity. By leveraging its leading-edge technologies, the Company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 3

04/22/2021 | Brent Fischthal, Koh Young America
Initiatives like the IPC Connected Factory Exchange (CFX) and IPC-Hermes-9852 underpin efforts within the industry to develop standards and help create a smart factory. These M2M communication standards, guided in part by Industry 4.0, are altering the manufacturing process by improving metrics such as first pass yield and throughput by applying autonomous process adjustments.

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/14/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.



Copyright © 2021 I-Connect007. All rights reserved.