PDR Celebrates 15 Year Partnership with ACI Technologies


Reading time ( words)

PDR, a leading manufacturer of BGA rework systems, test, and X-ray inspection systems since 1985, has announced its 15-year partnership with ACI Technologies as a Demonstration and Technology Center partner for its rework systems.

Dave White, president of PDR, stated, “The American Competitiveness Institute (ACI) is a special place where standards training, specialized labs and equipment accessibility, engineering services and a wide range of technologies to include PDR Focused Infrared Rework Systems are made available to address complex electronics manufacturing issues. ACI’s easy access from the Philadelphia International Airport also makes the demo center easily accessible for firms to take advantage of the services and technologies that the ACI offers.” 

ACI is open for business. Because the ACI factory floor is large in size and capable of both the distancing of guests and the strict enforcement of mask protocols, the demonstration center has remained operational during COVID, offering on-site demonstrations of machines and equipment from industry-leading manufacturers.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 3

04/22/2021 | Brent Fischthal, Koh Young America
Initiatives like the IPC Connected Factory Exchange (CFX) and IPC-Hermes-9852 underpin efforts within the industry to develop standards and help create a smart factory. These M2M communication standards, guided in part by Industry 4.0, are altering the manufacturing process by improving metrics such as first pass yield and throughput by applying autonomous process adjustments.

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/14/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.



Copyright © 2021 I-Connect007. All rights reserved.