IPC Issues Industry Alert Regarding U.S. EPA Prohibition of PIP (3:1) in Electronics


Reading time ( words)

IPC alerted members about the U.S. Environmental Protection Agency’s (EPA) final risk management rules to reduce exposure to five persistent, bioaccumulative, and toxic chemicals (PBTs). The alert calls attention to the rules, which went into effect February 5, 2021, and to one of the five PBTs with a history of use in electronics: phenol, isopropylated, phosphate (3:1) (known as PIP (3:1)).

The final rule for PIP (3:1) prohibits the processing and distribution of this chemical substance and products containing this chemical substance as of March 8, 2021. There are some exceptions to the prohibition, for example, for new and replacement parts for automotive and aerospace industries, however, there are no electronics industry exceptions.

As a chemical that can perform several functions simultaneously, sometimes under extreme conditions, PIP (3:1) has several distinctive applications: It is used as a plasticizer; a flame retardant; an anti-wear additive; or an anti-compressibility additive in hydraulic fluid, lubricating oils, lubricants and greases, various industrial coatings, and in adhesives and sealants. PIP (3:1) is also used in plastic-containing materials that are used to form tubes, harnesses, cables, sleeves, gaskets, and covers of parts – parts that are used in electrical or electronic products.

IPC seeks out member input on the EPA final rule, requesting information on how the final rule may adversely affect supply chains for electronics manufacturers. To provide input, contact Kelly Scanlon, EHS policy and research director, at KellyScanlon@ipc.org. To view news on EPA’s final PIP (3:1) ruling and other advocacy and EHS-related information, visit www.ipc.org/ipc-advocacy.

 

 

Share

Print


Suggested Items

PCB Technologies Expands Capabilities

04/16/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Arik Einhorn and Yaad Eliya of Israel-based PCB Technologies about how they’ve increased their capabilities down to 1 mil line and space to better support their customers from the military, aerospace, and medical markets.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

03/26/2021 | Andy Shaughnessy, Design007 Magazine
This week, we have a round-up of stories from around the industry, including a Real Time with… IPC APEX EXPO interview with Ventec, an article by Tamara Jovanovic about eliminating “garbage in, garbage out,” a review of an EIPC webinar by Pete Starkey, and news about another trade show going virtual this summer. And last but certainly not least, we bring you our one-minute video salute to all the fantastic people in this industry who we’ve worked with for decades. Enjoy!

Bonding Hybrid Multilayer Constructions at Rogers Corporation

03/10/2021 | Real Time with...IPC
John Ekis, Rogers Corporation's market segment director for aerospace and defense, discusses the SpeedWave family of low-dielectric constant, ultra-low-loss prepreg materials with excellent filling and bonding characteristics for hybrid multilayer constructions. SpeedWave prepreg is also compatible with FR-4 fabrication processes and lead-free PCB assembly processing. SpeedWave is available in multiple spread and open weave glass style and resin content combinations, and is also compatible with FR-4 fabrication processes and lead-free PCB assembly processing.



Copyright © 2021 I-Connect007. All rights reserved.