CyberOptics Demos High-Precision Sensor Technology at Touch Taiwan


Reading time ( words)

CyberOptics® Corporation, a leading global developer and manufacturer of high-precision 3D sensing technology solutions, will showcase the In-Line Particle Sensor™ (IPS), WaferSense® wireless measurement sensors and the NanoResolution Multi-Reflection Suppression™ (MRS™) sensor for inspection and metrology at the Touch Taiwan Exhibition on April 21-23rd at the Taipei Nangang Exhibition Center in Taiwan in booth M330.

Cyberoptics’ In-Line Particle Sensor (IPS) with CyberSpectrum™ software detects particles in gas and vacuum lines 24/7 in semiconductor process equipment and other controlled environments. An extension of the industry-leading WaferSense® Airborne Particle Sensor (APS) technology that is documented by fabs as the Best-Known Method (BKM), the IPS quickly identifies, monitors and enables troubleshooting of particles down to 0.1µm.  Process and equipment engineers can speed equipment qualification with 24/7 monitoring. They can compare past and present data, as well as one tool to another, and see the effects of cleaning, adjustments and repairs in real-time.

“The desire for a contamination-free process environment, coupled with stringent manufacturing requirements are driving the need for a best-in-class process to detect particles in gas and vacuum lines,” said Dr. Subodh Kulkarni, President and CEO, CyberOptics, “The IPS can quickly identify when and where particles originate, as well as the source, saving significant time and expense while maximizing yields and tool uptimes.”

The company will also display the NanoResolution MRS sensor that is integrated into CyberOptics’ WX3000™ system for wafer-level and advanced packaging inspection and metrology. It provides sub-micrometer accuracy on features as small as 25µm. While retaining its ability to reject spurious multiple reflections, it adds the ability to capture and analyze specular reflections from shiny surfaces of solder balls, bumps and pillars, providing highly accurate inspection and metrology.

With data processing speeds in excess of 75 million 3D points per second, the WX3000 system delivers production-worthy throughput greater than 25 wafers (300mm) per hour. Complete 100% 3D/2D inspection can be accomplished two to three times faster than alternative technologies.

About CyberOptics

CyberOptics Corporation (www.cyberoptics.com) is a leading global developer and manufacturer of high-precision 3D sensing technology solutions. CyberOptics’ sensors are used for inspection and metrology in the SMT and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the Company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

For more information, visit www.cyberoptics.com.

Share

Print


Suggested Items

Catching Up With Nova Engineering

04/27/2021 | Dan Beaulieu, D.B. Management Group
When searching for companies to interview, I always look for something unique and that makes the company special. Truth be told, I am a collector of stories about good, well-run, unique companies that we can learn something from. Nova Engineering is one of those companies.

Hans-Peter Tranitz: Dieter Bergman IPC Fellowship Award Recipient

04/22/2021 | Patty Goldman, I-Connect007
In this wide-ranging interview, Patty Goldman speaks with Continental Automotive’s Peter Tranitz about his IPC involvement with press-fit and other automotive standards which have earned him the coveted Dieter Bergman IPC Fellowship Award.

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 3

04/22/2021 | Brent Fischthal, Koh Young America
Initiatives like the IPC Connected Factory Exchange (CFX) and IPC-Hermes-9852 underpin efforts within the industry to develop standards and help create a smart factory. These M2M communication standards, guided in part by Industry 4.0, are altering the manufacturing process by improving metrics such as first pass yield and throughput by applying autonomous process adjustments.



Copyright © 2021 I-Connect007. All rights reserved.