SHENMAO Launches New Thermal Fatigue Resistant Lead-free Solder Paste


Reading time ( words)

SHENMAO America, Inc. is pleased to introduce its PF918-P250 Thermal Fatigue Resistance Lead-free Solder Paste. The new paste is formulated with the new SHENMAO Sn/4Ag/3Bi Alloy design with high thermal impact reliability.

PF918-P250 can increase thermal reliability performance by a minimum of 30 percent. It provides better mechanical shock performance than typical solder alloys such as SAC305 and SAC405, and is suitable for use in consumer electronics, servers and automotive electronics applications.

PF918-P250 has a similar melting point to SAC305 so that the regular SAC305 reflow profile can be applied.  With the innovative flux design, voiding can be easily controlled to less than 10 percent.

SHENMAO has successfully been approved by many international well-known electronic manufacturers. The company strives to offer the best quality without compromising cost and time-to-market while providing maximum value to all customers. SHENMAO America, Inc. blends SMT solder paste at its facility in San Jose, CA for distribution in North America.

Share

Print


Suggested Items

Catching Up With Nova Engineering

04/27/2021 | Dan Beaulieu, D.B. Management Group
When searching for companies to interview, I always look for something unique and that makes the company special. Truth be told, I am a collector of stories about good, well-run, unique companies that we can learn something from. Nova Engineering is one of those companies.

Hans-Peter Tranitz: Dieter Bergman IPC Fellowship Award Recipient

04/22/2021 | Patty Goldman, I-Connect007
In this wide-ranging interview, Patty Goldman speaks with Continental Automotive’s Peter Tranitz about his IPC involvement with press-fit and other automotive standards which have earned him the coveted Dieter Bergman IPC Fellowship Award.

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 3

04/22/2021 | Brent Fischthal, Koh Young America
Initiatives like the IPC Connected Factory Exchange (CFX) and IPC-Hermes-9852 underpin efforts within the industry to develop standards and help create a smart factory. These M2M communication standards, guided in part by Industry 4.0, are altering the manufacturing process by improving metrics such as first pass yield and throughput by applying autonomous process adjustments.



Copyright © 2021 I-Connect007. All rights reserved.