AI-powered Inspection Solutions from TRI at NEPCON Asia 2021


Reading time ( words)

Test Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, will join NEPCON Asia held at Shenzhen Exhibition & Convention Center from August 25 – 27, 2021. Visit booth #1H55 to experience the latest in Smart Factory Test and Inspection.

Join TRI at NEPCON Asia 2021 to discover the AI Verify Host, TRI's newest AI solution. The AI Verify Host is an AI-powered Smart Repair Station that reduces manual re-inspection and lowers operational costs. The AI-powered repair station enhances the production process by lowering false calls and provides real-time data analytics of the inspection status. 

TRI will showcase the recently released 3D SPI, TR7007Q Plus, equipped with an improved motion controller and enhanced 2D lighting for sharper inspection images. Also exhibiting will be the AI-powered 3D AOI TR7700Q SII with an industry-leading speed of up to 57cm2/sec. TRI's lineup will also include the high-end 3D AXI TR7600F3D SII and the Multi-core ICT with In-System LED Analysis function TR5001Q SII INLINE.

Realize your production line's potential with TRI's PCBA Test and Inspection solutions and Industry 4.0 data-driven management system, YMS 4.0. TRI's systems are designed to interoperate with other manufacturing equipment to minimize downtime, optimize production quality, and reduce operator workload.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 3

04/22/2021 | Brent Fischthal, Koh Young America
Initiatives like the IPC Connected Factory Exchange (CFX) and IPC-Hermes-9852 underpin efforts within the industry to develop standards and help create a smart factory. These M2M communication standards, guided in part by Industry 4.0, are altering the manufacturing process by improving metrics such as first pass yield and throughput by applying autonomous process adjustments.

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/14/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.



Copyright © 2021 I-Connect007. All rights reserved.