Global Automotive Manufacturer Selects Checksum for Sensor Project in Mexico


Reading time ( words)

CheckSum’s 12KN In-Circuit Test system was selected by a global automotive manufacturer for their Mexico sensor production expansion project.  

With many new automotive projects involving small PCBA’s being moved to this suppliers’ facility in Mexico, they needed to expand production capacity and reevaluate the capabilities of their current test and programming process.  Several major ATE suppliers were evaluated, including their current ICT and Programming vendors with whom they have a large investment in fixtures and equipment.  

“A key reason they decided to move their future projects to Checksum was the higher throughput achieved by combining their in-circuit test with device programming and functional test in the same fixture.  Our local 1-Call Support was also an important factor.  They have only 1-Call to make for new projects and for the support of any problems related to that project.  This is in contrast with the current solution that had multiple vendors for the test system, fixtures projects and programming tools,” says Ana Orozco (Mexico Sales Manager.

The faster test process achieved by combining parallel functional test, parallel programming, and ICT in the same fixture, represents a clear advantage for improving the test process for manufacturers of small PCBA’s.   With the ability to do more functional tests earlier in the process, automotive suppliers are improving quality and reducing the risk of scrap in an increasingly zero rework environment.  

Share

Print


Suggested Items

Hans-Peter Tranitz: Dieter Bergman IPC Fellowship Award Recipient

04/22/2021 | Patty Goldman, I-Connect007
In this wide-ranging interview, Patty Goldman speaks with Continental Automotive’s Peter Tranitz about his IPC involvement with press-fit and other automotive standards which have earned him the coveted Dieter Bergman IPC Fellowship Award.

Real Time with...IPC APEX EXPO 2021: Optimizing Pin Inspection In Automotive With True3D Tech

03/09/2021 | Real Time with...IPC
Guest Editor Michael Ford and Gustavo Jimenez, Koh Young's sales manager for Northern Mexico, discuss some of the company's newest technologies, including True3D™ technology for pin inspection, which has proven popular with the automotive segment.

Building A Better, Brighter LED Headlamp with Top-Side Alignment Process (TAP)

02/10/2021 | Glenn Farris, Universal Instruments Corp.
An emerging trend in the automotive industry is the adoption of advanced LED headlamp lighting systems. These systems drive challenging placement requirements for LED packages. In this paper, we will review these unique challenges and discuss a novel approach to high-accuracy placement of LED packages enabling a scalable production solution.



Copyright © 2021 I-Connect007. All rights reserved.