I-Connect007 Editor’s Choice: Five Must-Reads for the Week


Reading time ( words)

We just wrapped up IPC APEX EXPO 2022, and I think it went better than anyone could have expected. I wasn’t sure the live show would actually take place. With the COVID protocols in California changing daily, no one knew for sure that a live show would even be allowed to open.

But the show exceeded everyone’s expectations. After two years, it was just great to see everyone in person and not on a Teams call. I finally met our “new” editor, Michelle Te, in person; she joined our team in April 2020. How many of you were afraid it would be a three-day ghost town?

The interconnect industry thrives on our human interconnections, and while we made do with videoconferences for the past few years, nothing can replace in-person interactions. I think IPC APEX EXPO is a good omen of things to come in the near future. Let’s hold a good thought.

It was great seeing everyone after such a long time apart. We’re back in San Diego for one more year, and then it’s on to Anaheim!

Day 3: Lots of Action in San Diego
Published January 27

Expo attendance was down, obviously, but the conference attendance was much like it was pre-pandemic. Traffic in the aisles was pretty steady for most of the show. Best of all, we all got to meet and chat in person, albeit with masks and social distancing. Let’s hear it for IPC’s show management staff—and their many industry volunteers—for putting this show together. In the uncertain post-pandemic environment that we face today, they pulled off a successful trade show in a state known for changing the rules on an hourly basis.

Altium, MacroFab to Launch Industry-First Integrated PCB 'Design With Manufacturing' Application
Published January 27

Altium and MacroFab have launched Altimade, a “design with manufacturing” environment that allows designers and design engineers to select manufacturers from MacroFab’s global network of suppliers. Component and fab prices and lead times are all updated and accessible. I think we can expect to see more of these platforms that put designers and fabricators into closer contact with each other, and that’s a good thing for the industry.

Real Time with... IPC APEX EXPO: PCBA Cleaning Trends
Published January 26

Tom Forsythe of KYZEN always gives a great interview, and this is no exception. During IPC APEX EXPO, Tom spoke with Editor Nolan Johnson about the latest addition to their AQUANOX line, as well as trends in cleaning of PCB assemblies and the overall market for assembly cleaning.

IPC Announces New Board Members at IPC APEX EXPO 2022
Published January 27

IPC announced new board members during IPC APEX EXPO, and there were quite a few familiar faces in the mix. Glad to see our friend Bob Neves of Microtek Laboratories get the top spot. Of course, that just means IPC can make him do more! And let’s hear it for Hannah Nelson of Valparaiso University, the newest student board member. Hannah stopped by the I-Connect007 booth and spoke with Happy Holden and shared her excitement about joining this industry. Are you still excited about your career?

Real Time with... IPC APEX EXPO: New Book on Stackup Design
Published January 26

During IPC APEX EXPO, Technology Editor Happy Holden interviewed Z-zero founder Bill Hargin, the author of the new I-Connect007 eBook The Printed Circuit Designer's Guide to... Stackup Design. Bill and Happy discuss the ins and out of creating the perfect stackup, and why this “design within the design” is such a critical part of the PCB.

Share




Suggested Items

Cadence Provides ‘Clarity’ in Design Tool

08/11/2022 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Brad Griffin, product marketing director for Cadence Design Systems, about Cadence’s Matrix solver technology. They discuss its use as a multi-disciplinary field solver as well as Cadence’s focus on thermal analysis and utilizing the power of the cloud.

John Watson Wants You—to Sign Up for His PCB Design Class

08/11/2022 | Andy Shaughnessy, Design007
I-Connect007 columnist John Watson is teaching an introductory class on PCB design at Palomar College this fall, but this is much more than a basic design class. But John has hit a slight snafu: He needs a few more students to sign up before Aug. 23, or the class will be cancelled. It’s an online class, so you don’t have to live in San Diego to attend. In this interview, John talks about the genesis for the class and its benefits.

HyperLynx: There’s an App for That

08/05/2022 | I-Connect007 Editorial Team
I recently spoke with Todd Westerhoff, product marketing manager for signal integrity software tools at Siemens. We discussed a new capability called HyperLynx Apps that offers a new take on traditional signal and power integrity analysis, and how that fits in with the Siemens plan to put SI and PI tools into the hands of more designers early in the design cycle.



Copyright © 2022 I-Connect007. All rights reserved.