Reliability and Harmonization of Global Standards at Forefront of EIPC Efforts


Reading time ( words)

At IPC APEX EXPO 2015, I caught up with EIPC’s Michael Weinhold and Alun Morgan for a discussion on both recent and ongoing focuses for EIPC, and the importance of the alignment of global standardization processes, especially for Asia.

Pete Starkey: I'm here with two gentlemen from the European Institute of Printed Circuits Technical Director Michael Weinhold, and Chairman Alun Morgan.

Alun, can you get us started by describing the successes of recent times since you joined EIPC? You had a conference recently. What was the outcome of the conference?

Alun Morgan: Yes, we had a very successful conference in Munich at the beginning of February. In fact, that marks the fifth event that we've had this year, so we've carried out four workshops and one conference in the space of the first, say, five weeks of the year. That’s pretty encouraging. The conference was in Munich. We attracted nearly 90 delegates from 11 different countries to attend. We usually find the conferences work very well when we have a good agenda, which means we have good technical presentations. We have an accessible venue, which Munich certainly was. And third we have a good attraction. We were able to organize a visit to the Eurofighter production line in Manching, courtesy of Airbus Defence and Space, which I was very pleased they agreed to. I think those three things came together and gave us a very exciting conference.alun_morgan_interview.png

Highlights include a session on reliability, which was very well reviewed and commented upon, and we will certainly run a road show of workshops on reliability. So we'll bring together some of the key speakers from the events and we'll run those out into the next few months where we hope to attract a lot of interest.

The other item we covered in some detail was signal integrity, which is becoming more and more important in many applications. We had a very nice overview of that, including an aspect from a chemical supplier, who has proposed a new treatment for the oxide side of copper. We know very well what the profile of copper does to signal integrity. Then we got another view that we haven't really had in the last couple of years that really made it nice and rounded. So now we have a very nice view from the people like Polar Instruments, who provide the test equipment, from the board shops, the fabricators, from chemistry supplies and for laminate suppliers.

All in all, a great package that we can also road show as a training workshop. So I think we'll certainly roll that out in the next few months. We're looking forward now to SMT in May which will be in Nuremberg, where again I've been invited to deliver a keynote speech in the PCB forum. And then our next conference in June will be in Berlin.

Starkey: May I ask you what will be the topic of your keynote speech?

Share

Print


Suggested Items

Alex Stepinski: A Philosophical View

11/30/2021 | I-Connect007 Editorial Team
"My philosophy is to rely more on sensors throughout the process to measure things non-destructively, then build a model for how you’re going to perform, and just validate against the model," said Alex Stepinski. "It’s the next step slowly happening worldwide. For instance, we’ve had 2D AOI for many years. Sometimes, this is complemented with electrical tests. Now, you start to see more 3D AOI happening. You see them putting more sensors on the AOI equipment for direct measurement. Then, you also have the traditional signal integrity testing."

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

11/26/2021 | Nolan Johnson, I-Connect007
If you’re in the United States like I am, and if you celebrated with a traditional Thanksgiving dinner, like my family did, then you just might have fallen asleep sitting up in a chair (or in my case, stretched out on the couch) and missed some of the highlights in the news this week. Never fear, I woke up early to bring the top five news items you should know for this week. We have industry bookings and sales news from IPC, some news from the flex sector, an explanation of induction lamination from Happy Holden, and two different takes on “sustainability.”

New Methods for Quantifying PCB Design Weaknesses and Manufacturing Challenges

11/18/2021 | Nolan Johnson, I-Connect007
Gerry Partida explains, "The industry is at a new point in evolving how we look at building boards. Our industry has historically built boards and then tried to find a test for them. Then, when they found a test for it, they figured out that it needed to be analyzed before they built the board. We did this with electrical test. We built boards and down the road, as people started asking, “Why am I buying bad boards? We should electrically test them,” electrical test was introduced, reluctantly, into the test part of manufacturing printed circuit boards by suppliers or fabricators. Then they embraced it. But when we started testing boards, we did comparison tests."



Copyright © 2021 I-Connect007. All rights reserved.