Micro Industries Selling Excess Electronics Manufacturing Assets


Reading time ( words)

EMS provider Micro Industries in Westerville, Ohio will be liquidating some of their excess and unused assets utilizing the online auction services of Baja Bid. The bidding for this event will open promptly at 8:00am EST on December 1, 2015 and the closing will begin at 11:00am EST on December 3, 2015.

The items in this event include a 2005 Speedline Vectra 450F “Lead-Free” Wave Solder; 2006 MPM UP2000 HiE Screen Printer; 2008 Asymtek Century C718 Dispenser; 2005 Heller 1809EXL Reflow Oven; Fuji 643 SMT Pick & Place; Fuji QP351E-MM SMT Pick & Place; Fuji & Hover-Davis SMT Feeders; Bliss Stencil Carts; Portable Clean Room; Portable Environmental Chamber; Arlink Workbenches; Conveyor Tech Conveyors; Oscilloscopes; Digital Multi-Meters; Power Supplies; Device Programmers; Rhode & Schwartz Analyzer and More…….

To view the complete line of items currently up for auction; please CLICK HERE.

Any questions about the event can be directed to Arlin Horsley at 1-813-992-2437.

Share

Print


Suggested Items

Super Dry: Increasing Component Storage Needs

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Super Dry’s Richard Heimsch about how the need for dry storage solutions has increased throughout the pandemic, including further demands for traceability and automation capabilities.

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2021 I-Connect007. All rights reserved.