2015’s Most Read SMT Articles


Reading time ( words)

Enhancing Thermal Performance in Embedded Computing for Ruggedized Military and Avionics Applications

Embedded computing systems used in many military and avionics applications are trending toward higher heat fluxes, and as a result performance is being hindered by thermal limitations. This article outlines a series of passive thermal improvements that are easily integrated into legacy systems and can provide a 3-4x increase in dissipated power.

Benefits of Soldering with Vacuum Profiles

Requirements for void-free solder joints are continuously increasing in the field of electronics manufacturing, bringing new challenges that are evolving on a daily basis due to the relentless introduction of new variants of so-called bottom-terminated components (BTCs).

NEPCON China Showcases Latest Manufacturing Tech in Asia

Considered Asia’s biggest, most influential SMT and electronics manufacturing event, NEPCON China 2015 attracted over 450 leading brands from 22 countries, who showcased the latest electronics manufacturing technologies and products across an exhibition area of 25,000 sqm.

Pad Cratering Susceptibility Testing with Acoustic Emission

Pad cratering is difficult to detect by monitoring electric resistance since it initiates before an electrical failure occurs. This article presents the results of pad cratering susceptibility of laminates using the acoustic emission method under four-point bend and compares the AE results to the pad-solder level testing results.

EMI-caused EOS Sources in Automated Equipment

Electrical overstress causes damage to sensitive components, including latent damage. A significant source of EOS is high-frequency noise in automated manufacturing equipment. This article analyses sources of such noise, how it affects components and how to mitigate this problem.

Share

Print


Suggested Items

Catching Up With Nova Engineering

04/27/2021 | Dan Beaulieu, D.B. Management Group
When searching for companies to interview, I always look for something unique and that makes the company special. Truth be told, I am a collector of stories about good, well-run, unique companies that we can learn something from. Nova Engineering is one of those companies.

Hans-Peter Tranitz: Dieter Bergman IPC Fellowship Award Recipient

04/22/2021 | Patty Goldman, I-Connect007
In this wide-ranging interview, Patty Goldman speaks with Continental Automotive’s Peter Tranitz about his IPC involvement with press-fit and other automotive standards which have earned him the coveted Dieter Bergman IPC Fellowship Award.

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 3

04/22/2021 | Brent Fischthal, Koh Young America
Initiatives like the IPC Connected Factory Exchange (CFX) and IPC-Hermes-9852 underpin efforts within the industry to develop standards and help create a smart factory. These M2M communication standards, guided in part by Industry 4.0, are altering the manufacturing process by improving metrics such as first pass yield and throughput by applying autonomous process adjustments.



Copyright © 2021 I-Connect007. All rights reserved.