Kaifa Receives 2015 National Quality Trustworthy Team Award


Reading time ( words)

China-based EMS firm Shenzhen Kaifa Technology Co. Ltd's Solid State Storage Business Unit (SSBU) and Surface Mount Advanced Engineering (SMT) team have been honored with the "2015 National Quality Trustworthy Team" award by the China Field Management Star-rating Assessment and Quality Trustworthy Team. Kaifa's SSBU and SMT Team were selected among the 900 teams assessed.

Kaifa's SSBU and SMT team constantly pursue excellent quality and customer service. For instance, the SMT team requires the employees to handle full-line equipment operation, while technicians need to be professionally trained. To ensure outstanding operation and product quality, Kaifa offers its employees training. The team has also optimized its workforce, reducing its number of operators per line from 2 people to 1.5 in 2014, in line with the company's "SMT human optimization" improvement project.

Share

Print


Suggested Items

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2021 I-Connect007. All rights reserved.