Conecsus Presents SMT Metals Waste Recycling Solutions at SMTAI 2016


Reading time ( words)

Conecsus LLC will illustrate how the company processes wastes containing primarily tin, tin-zinc, lead, silver, gold, and copper, and converts them into usable metal products for sale into the global market, at the upcoming SMTA International 2016 Conference and Exhibition, September 27-28, 2016, at the Donald Stephens Convention Center in Rosemont, Illinois. Conecsus will be at Booth #818.

Conecsus’ Tom Mitchell, North American Business Manager, will discuss what Conecsus does and how its recycling technology benefits the SMT/PCB electronics manufacturer, how the system works, and how it represents a new way of dealing with metals-contaminated waste in an increasingly environmentally-conscious manufacturing world.

With patented, advanced recycling technologies, Conecsus keeps its customers compliant with local, state, and federal regulations while decreasing their carbon footprint and reportable waste streams. Conecsus, LLC is a sophisticated ‘green’ recycler and refiner of SMT solder/solder paste wastes and residues, as well as Tin, Lead, Silver, Gold, and Copper from a variety of manufacturing industries. Conecsus converts these wastes into usable metal products.

About Conecsus

Founded in 1980, Conecsus, LLC is a sophisticated ‘green’ recycler and refiner of SMT solder/solder paste wastes and residues, as well as Tin, Tin-Zinc, Lead, Silver, Gold, and Copper from a variety of manufacturing industries. Located in Terrell, Texas, USA, Conecsus converts these wastes into usable metal products. Conecsus’ mission is to provide innovative and high-quality industrial byproducts management, metal recovery, and recycling options that provide world-class value and service to our customers, and display respect and stewardship toward the environment. For more information, visit www.conecsusllc.com.

Share

Print


Suggested Items

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.



Copyright © 2021 I-Connect007. All rights reserved.