Lenthor Engineering Installs Two New Pieces of Capital Equipment to Its EMS Assembly Group


Reading time ( words)

Lenthor Engineering, a California based designer, manufacturer and assembler of rigid-flex and flex printed circuit boards, has recently made several capital equipment investments into their EMS assembly area including an Aqueous Technologies StencilWasher ZDO Ultra Sonic Stencil Washer and a Cyberoptics SE500 Solder Paste Inspection System. Lenthor Engineering made the recent purchases as part of a continued effort to expand their capabilities and meet customer requirements.

Cyberoptics_SE500-D3-300.pngBoth of these investments will do a great deal to improve Lenthor’s overall assembly speed. The StencilWasher ZDO will shorten Lenthor’s stencil cleaning time by allowing them to remove all solder-paste types and incurred adhesives in cycle times averaging less than five minutes. The SE500 will push their inspection speed to the highest level possible, inspecting even the most demanding assemblies with >80cm2/second inspection speed without compromising on measurement accuracy and repeatability.

Director of Sales and Marketing, David Moody comments, “Lenthor continues to recognize the requirements of our customers, both current and future, and strives to fulfill them with these latest equipment installations.  It is our goal to be the premier flex and rigid-flex assembly company. Our customers deserve nothing less.”

Both the automated ultrasonic stencil cleaning and the solder paste inspection systems are part of Lenthor’s $750k capital equipment investment plan for their assembly area in 2016.

Share

Print


Suggested Items

Meet Christine Davis, I-Connect007 Columnist

12/23/2020 | I-Connect007 Editorial Team
Meet Christine Davis, one of our newest columnists! Christine will share her expertise and lessons learned through her journey as one of the few women in the electronics industry to found and run her own company.

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

What Is Digital Twin Technology, and Why Is It So Important?

09/09/2020 | Happy Holden, I-Connect007
Happy Holden describes how Siemens' 12-part webinar series, “Implementing Digital Twin Best Practices From Design Through Manufacturing,” is an excellent series designed to educate the electronic manufacturing engineer on the progress of using a digital thread to improve products and performance.



Copyright © 2021 I-Connect007. All rights reserved.