-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Selective Soldering: Design, Process Challenges and Practical Solutions
April 28, 2016 | Pete Starkey, I-Connect007Estimated reading time: 8 minutes
He described three different options for mini-wave selective soldering: wettable nozzle, non-wettable nozzle and non-wettable nozzle with the work angled from the horizontal. Wettable nozzles were useful for soldering close to other components and, because solder flowed in all directions, no rotation was required. Solder bridging was also reduced, although lead protrusion length was a critical parameter. Non-wettable nozzles, with solder flowing in a single direction, could give more consistent results, but there was the consequent need for board or solder pot rotation. Bridging was avoided by a directed nitrogen stream heated to above the alloy melting point, and lead protrusion length was then less critical. Best results on pitches as fine as 1 mm were achieved by keeping the protrusion length as small as possible and tilting the work at an angle of 7–10 degrees.
For high volume work, short cycle times could be achieved by dip-soldering using a multiple-wave system, with dedicated tooling plates and laser-cut screens to avoid bridging. Soldering of fine-pitch connectors was feasible, but required higher pump speeds and some form of hold-down unit to prevent components from lifting. Care was needed if using a multiple-dip process, to avoid hairline bridging due to oxide buildup.
This SMART Group workshop very positively achieved its objectives: an excellent learning opportunity with a good balance between technical explanation and practical involvement, which generated plenty of interactive discussion and sharing of experiences from delegates and presenters. Nigel Burtt wrapped up the proceedings with thanks to delegates for their attention, to Vitronics Soltec, Kester, MBDA and Renishaw for providing expert speakers, and to APP Electronics for generously offering the use of their conference and demonstration facilities.
Page 3 of 3Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.