Metcal to Exhibit at SMTA Guadalajara Expo & Tech Forum


Reading time ( words)

Metcal today announced plans to exhibit at the SMTA Guadalajara Expo & Tech Forum, scheduled to take place Oct. 5-6, 2016 at Hotel Riu Guadalajara. Company representatives will show the Metcal USF-1000 Solder Wire Feeder, along with Metcal’s proven rework and repair equipment, including the Scorpion Rework System and MX-5200 Soldering System. 

metcal3.jpgThe new Metcal USF-1000 Solder Wire Feeder adds a new level of control and convenience to the soldering process. Designed to integrate easily with Metcal’s MX-5200 or MX-500 series solder systems, the Solder Wire Feeder increases soldering speed while it eliminates wasteful tangles and unspooling. 

metcal1.jpgThe Scorpion redefines precision and addresses the technical demands presented by component manufacturers today. Metcal’s Automatic Placement Package is capable of 50mm of motorized travel in the Z-axis and a full 360° in ϴ (Theta). The Automatic Placement Package offers fine motor control in the Z-axis and ϴ during alignment of the component to the pad. The new force feedback control during the placement process enables the unit to accurately pick and place components without disturbing the component or solder. 

metcal2.jpgThe MX-5200 series features a dual-simultaneous use option, meaning that two hand-pieces can work from one power supply at the same time. The dynamic option enables the two hand-pieces to share 80 watts output power based on demand, adding even more application flexibility and speed.  Four different hand-pieces and a comprehensive range of soldering and rework cartridges support the MX-5200 Series simultaneous dual operation. These include the Metcal Advanced™ Hand-Piece for SMD rework, a Metcal Ultra-Fine™ Hand-Piece for fine access, a Precision Tweezer capable of removing a range of components from 0201 chips to 28mm SOICs, and a Desoldering Gun for safely removing through-hole components. 

For more information about any of Metcal’s bench tool solutions, click here.

About Metcal 

Since 1982, Metcal has been a recognized worldwide leader in the electronics assembly marketplace. As part of OK International, Metcal’s industry-leading position addressing advanced technology in conduction soldering and rework/repair, has and will continue to broaden to a full electronics bench tool single-source solution. Metcal product lines currently include: hand soldering and desoldering, convection rework products, fume extraction and fluid dispensing tools.  

Share

Print


Suggested Items

SMTAI 2019: Chris Bastecki on Low-temperature Solder Challenges and Products

10/14/2019 | Real Time with...SMTAI
Chris Bastecki, director of global PCB assembly at Indium Corporation, discussed challenges of low-temperature solder and the company's new product, Durafuse LT, which provides novel properties and reliability.

Real Time with... SMTAI 2019 Video Interviews

10/09/2019 | Real Time with...SMTAI
The SMTA International Conference and Exhibition 2019, which took place September 22–26, 2019, at the Donald E. Stephens Convention Center in Rosemont, Illinois, concluded successfully. For those of you who were not able to make it to the show, catch our video interviews with the movers and shakers of the electronics industry. We've updated our video presentation for a better experience for our users, so check it out!

SMTAI 2019: Happy Holden’s On-the-Scene Report

10/03/2019 | Happy Holden, I-Connect007
Last week concluded the 2019 SMTAI conference in Rosemont, Illinois. Overall, I think the show was successful and covered all aspects of SMT processes.



Copyright © 2019 I-Connect007. All rights reserved.