AIM’s Manuel Munguia Obtains SMT Processes Certification


Reading time ( words)

AIM Solder is pleased to announce that Manuel Munguia, Senior Technical Support Engineer – Mexico, has successfully completed the SMTA Certification program, and is now recognized as an STMA Certified Process Engineer. 

The SMTA Certification Program is a three-day offering, intended for SMT Process and Manufacturing Engineers, consisting of a 1.5-day workshop on topics in SMT processes. The program concludes with an open and closed book examination. This challenging examination requires both written answers and calculations, with the intent to enable the attendee to establish competitive credentials, as certified by the SMTA. 

“We are proud of Manuel’s achievements and delighted to have him on our technical support team,” said Carlos Tafoya, AIM’s Technical Support Director. “He has always demonstrated great enthusiasm and passion for improved SMT processes, contributing to the continued success of our team.”

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com.

Share

Print


Suggested Items

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.

What Makes a Good Process Engineer?

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Tuan Tran, director of customer solutions at Green Circuits, about what makes a successful process engineer. They also discuss a typical day in the life of a process engineer—from pre-manufacturing through post-DFM, for process improvement. As Tuan points out, there are a variety of paths to becoming a great process engineer.



Copyright © 2021 I-Connect007. All rights reserved.