BEST Supports Technical Rework Seminar


Reading time ( words)

BEST Inc. announces that it has will be participating in a Technical Rework Seminar that will take place Tuesday, March 7 at the Kester Global Headquarters in Itasca, Illinois from 9am to 5pm.

The Technical Rework Seminar will cover the following topics: Alternative Methods for BGA Rework Solder Paste and Flux Application; Rework Challenges for Leading Edge Components BGA, QFN and LED in Today's Fast Moving Industry; Surface Insulation Resistance of No-Clean Flux Residue Under Various Surface Mount Component; Rework Flux - Application and Reliability; and Benchtop PCB Repair.

Kester's Technology Manager, Denis Jean; Bob Wetterman from BEST; Paul Wood from Metcal; and Grant Price from Chemtronics will be presenting.

For more information or to RSVP for the seminar, contact Michelle O'Brien at mobrien@kester.com.

About Business Electronics Soldering Technologies (BEST)

Headquartered in Rolling Meadows, Illinois BEST is a master IPC-certified solder and wire harness training center certifying students and instructors in IPC-A-620, J-STD-001, IPC-A-610 and IPC 7711/21. In addition BEST is a supplier of PCB rework and repair services as well as tools for those services in the communications, computer, industrial, automotive, avionic and military sectors.

Share

Print


Suggested Items

IPC’s Shawn Dubravac: COVID-19 Outbreak Accelerates Industry Shifts Already Under Way

05/21/2020 | Barry Matties, I-Connect007
On May 19, Barry Matties spoke with Shawn Dubravac, chief economist for IPC. While discussing other topics, Matties asked for Dubravac’s perspective on shifts in the market, who observed that the recessionary trend might be behind us; the markets are already showing recovery. Still, it could take a year or so to fully recover.

Happy’s Smart Factory Protocol Primer

04/29/2020 | Happy Holden, I-Connect007
The smart factory concept is built upon data interchange as the foundation. There has been much development in the area of industrial and manufacturing data protocols over the years, stretching back into the 1960s. This article by Happy Holden surveys what are considered the most common protocols in use in the electronics manufacturing industry today, including IPC-CFX/ Hermes, OML, SECS/GEM, and MAPS.

Case Study: Example of ASKEY Applying QML Validation

04/23/2020 | Edy Yu, I-Connect007
The PCB007 China team paid a visit to the ASKEY plant in Wujiang, Jiangsu, to learn more about their QML process. In this interview with Qixian Zhang, vice GM of ASKEY’s Electronics Product Quality Assurance Department, he discusses what QML means to ASKEY and the electronics industry as a whole.



Copyright © 2020 I-Connect007. All rights reserved.