Indium Corporation Products 'Live@APEX'


Reading time ( words)

Indium Corporation will be running its low-voiding solder products "Live@APEX" in more than 20 partner booths throughout the IPC APEX Expo technical conference on Feb. 14-16 in San Diego, California.

"Live@APEX", a joint effort between Indium Corporation and its industry partners, accurately and honestly depicts the performance of the company's materials in real time. The program places Indium Corporation products into live equipment demonstrations on the APEX show floor.

Mario Scalzo, Senior Technical Support Engineer, has chaired the program for 13 years. Scalzo has worked on hundreds of factory floors, formulated solder pastes and fluxes, actively participated in the manufacture of products, performed the tests, and run the trials. This experience gives him a full understanding of both the materials and the needs of customers. Through his efforts, the program has expanded to include the full range of SMT assembly materials, including solder pastes, fluxes, solder preforms, solder wire, and more.

Live@APEX benefits all participants: Indium Corporation, the industry partners, and most importantly, the customer, who gets to see and experience the equipment and materials in a live-action environment. If you see an Indium Corporation product running in a booth, be sure to Tweet or tag @IndiumCorp and use the hashtag #LiveatAPEX.

To learn more about the Live@APEX program, contact Mario Scalzo or visit Indium Corporation at booth #1011. 

About Indium Corporation 

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com or email abrown@indium.com. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.facebook.com/indium or @IndiumCorp.

Share

Print


Suggested Items

Data: Key to Automating Right the First Time

06/14/2019 | Barry Matties, I-Connect007
Michael Ford, senior director of emerging industry strategy, reflects on his first two years with Aegis Software Corporation and looks to the future of the data-driven manufacturing environment. Michael shares how the CFX and data collection model can play an important role in the streamlining processes, including Industry 4.0 and the supply chain.

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

What Electronics Companies Need to Know About Environmental Product Requirements

06/12/2019 | Kelly Scanlon, IPC Director of Environment, Health and Safety Policy and Research
The task of monitoring and complying with environmental, health and safety (EHS) rules that affect electronics companies and their products requires a watchful eye on all levels of government: local, state, national, and international.



Copyright © 2019 I-Connect007. All rights reserved.