Indium Corporation Names Nash as Product Manager – PCB Solder Paste


Reading time ( words)

Indium Corporation has named Chris Nash as Product Manager for PCB Assembly Materials.

Nash is responsible for managing new solder paste product development, including strategy guidance and execution, directed to sales to the printed circuit board industry. In addition, he will provide solder paste product support, including leading marketing communications efforts, delivering field sales and technical team training, and interfacing with manufacturing for increased customer support. 

Nash has worked for Indium Corporation for more than 10 years and has served in a number of roles, including inside sales, product management, and global technical support. His most recent role was New Product Development Manager for PCBA. 

Nash earned his bachelor’s degree from Clarkson University and holds his Six Sigma Green Belt from Dartmouth College’s Thayer School of Engineering. He is an SMTA-certified Process Engineer and holds certifications from the IPC for both A-600 and A-610D standards.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA. 

For more information about Indium Corporation, visit www.indium.com

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Reflow Your Solder and Your Data for Industry 4.0

06/11/2019 | Nolan Johnson, I-Connect007
I-Connect007 Managing Editor Nolan Johnson recently spoke with KIC President and Founder Phil Kazmierowicz and Manager of Applications and Sales MB “Marybeth” Allen as they each transitioned into new roles in the KIC leadership team. The conversation ultimately turned to the current dynamics in the industry, particularly Industry 4.0 and streamlining processes.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.



Copyright © 2019 I-Connect007. All rights reserved.