Indium's Joe Bahou to Present at SMTA San Diego Chapter Meeting


Reading time ( words)

Indium Corporation's Joe Bahou, Technical Sales Support Engineer, West Coast, will present at SMTA San Diego's Chapter Meeting on March 8 in Poway, California.

Bahou will present Minimizing Voiding in Bottom Terminating Components, which provides an introduction to QFN challenges, determining void criteria, design of experiments (DOE), results, void control using Solder Fortification, and conclusions.

Bahou supports Indium's advanced SMT materials, fluxes and engineered thermal materials to customers on the west coast of the USA. He provides comprehensive technical advice in the selection, use and application of solder paste, fluxes, and solder alloy fabrications to customers in the electronics assembly industry. Bahou is based in Huntington Beach, California, and has more than 16 years of experience in electronics assembly manufacturing, including hands-on experience in SMT production. Bahou has a bachelor's degree in mechanical engineering from the University of Massachusetts Lowell. In addition, he has worked on the development of 01005 chip component placement onto a printed circuit board.

About Indium Corporation 

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com

Share

Print


Suggested Items

3D Optical Inspection Provides ‘Eyes’ for Process Improvements in Industry 4.0

06/21/2019 | Jenny Yuh, Koh Young Technology, and Brent Fischthal, Koh Young America
Automated 3D solder paste inspection (SPI) and 3D automated optical inspection (AOI) systems have become an integral part of the printed circuit board assembly (PCBA) process because they help ensure high-quality production. As today’s board complexity is increasing, inspection technology has become even more critical.

Goepel electronic Solutions, Webinar Series, and Trends

06/19/2019 | Barry Matties, I-Connect007
Barry Matties catches up with Matthias Müller to chat about the wide range of test and inspection solutions currently being offered by Goepel electronic as well as the informative webinar series produced by the company to help further educate their customer base and promote technical discussion on a number of topics.

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.



Copyright © 2019 I-Connect007. All rights reserved.