MaCon Adds Vi TECHNOLOGY's PI Series to Its Line Card in Argentina


Reading time ( words)

Vi TECHNOLOGY is pleased to announce its expanded relationship with MaCon Máquinas y Consumibles. MaCon has been successful with the sales of Vi TECHNOLOGY's AOI systems in Argentina, and is adding the award-winning PI Series to its line card. MaCon is becoming the sole distributor of the complete 3D Solutions in Argentina, including 3D SPI, 3D AOI and Sigma Link.

The PI Series has been recognized by the industry as the most innovative SPI product since the introduction of Moiré systems. Outstanding accuracy and repeatability, auto-programming and unprecedented review are the key differentiating features. Since its introduction, the PI Series has been installed largely to become the new worldwide best seller for Solder Paste Inspection.

The team at Máquinas y Consumibles SRL has more than 35 years of experience in the electronics market. MaCon’s team of highly trained professionals, dedicated to each specialty, are committed to providing excellent support before and after sales. With headquarters in the City of Buenos Aires, and branches in Rio Grande and Ushuaia, the company is able to provide immediate support for its customers.

"I have known Juan and Emiliano for more than 15 years, and I am convinced that MaCon's professionalism along with our complete 3D solution will offer our customers in Argentina new horizons in process control," said Jean-Marc Peallat, VP Global Sales for Vi TECHNOLOGY.

About Vi TECHNOLOGY

Vi TECHNOLOGY is a global designer, manufacturer and supplier of a wide range of innovative inspection equipment and software solutions for PCB assembly. Vi TECHNOLOGY serves very demanding market segments including telecoms, consumer, computer, automotive, infrastructure, industrial and medical. 

For more information, visit www.vitechnology.com.

Share


Suggested Items

Indium's Karthik Vijay Talks Engineering for Automotive Applications

01/22/2018 | Barry Matties, I-Connect007
Barry Matties met with Karthik Vijay, Indium Corporation's technical manager for Europe, at last year's productronica, where everything from stencils and laser cutting to flux technology and jetting were discussed. If you want to know about where material technology currently stands in the automotive landscape, you’ll want to read on.

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Top 10 Most-Read SMT007 Columns of 2017

01/02/2018 | I-Connect007
Another year is over in the SMT industry. 2017 saw a myriad of hot topics, including Industry 4.0, the millennials’ entry into the manufacturing space, and alternative solder materials, to name a few. Without further ado, here are the Top 10 columns from SMT007 over the past year.



Copyright © 2018 I-Connect007. All rights reserved.