Libra Industries Enhances SPI Capabilities


Reading time ( words)

Libra Industries, a privately held electronics manufacturing services (EMS) provider, has completed the installation of a third Omron CKD VP5200-V Solder Paste Inspection system at its Mentor facility. The company also runs one Omron SPI system at its Dallas facility.

The VP-V series is specially designed to achieve a higher speed of inspection to meet the needs of high-speed production lines, such as Libra Industries’. With inline detection, mounting faults at the initial stage, which make up 70 percent of the total, can be detected early on. The VP5200-V provides Libra Industries with high accuracy and repeatability to support the inspection of ultra-fine Pads.

With the Omron VP-V series SPI systems, Libra Industries benefits from industry-leading speeds of 9,400mm2/sec. The system’s repeatability of height inspection is within 1µm at 3σ (height standard jig), and the repeatability of volume inspection is within two percent at 3σ (CKD's sample PCB).

About Libra Industries

Libra Industries is a leading provider of integrated Electronic Manufacturing Services (EMS), serving OEMs with complex or technologically sophisticated manufacturing requirements in a broad range of industries including industrial automation, medical, military and aerospace, instrumentation and LED lighting. Five world-class manufacturing facilities allow Libra Industries to provide customers with manufacturing flexibility including complete system build, module and subassembly production, as well as simple to complex PC board assembly. With an ongoing commitment to investment in people, quality systems, and the latest manufacturing equipment and processes, Libra Industries is committed to managing their clients’ products from initial design and prototype to full production; assisting their clients in their efforts to improve time to market, reduce total systems cost, and increase quality. For more information, visit www.libraind.com.

Share


Suggested Items

Investigating Analytical Tools for Testing Cleanliness with Foresite's Eric Camden

04/19/2018 | Patty Goldman, I-Connect007
At the recent West Penn SMTA Expo, Eric Camden, lead investigator at Foresite Inc., speaks with I-Connect007's Patty Goldman about fluxes and analytical tools for testing cleanliness, and how these impact the reliability of the assembled boards.

Stencil Printing Techniques for Challenging Heterogeneous Assembly Applications

04/16/2018 | Mark Whitmore and Jeff Schake, ASM Assembly Systems
A new generation of near microscopic size SMT chip capacitors has appeared in the market, known as either 0201 or 008004. This article investigates and characterizes the stencil printing process for compatibility with M0201 capacitor assembly. Effects of circuit board quality, stencil thickness, and stencil nano-coating are evaluated against solder paste volume transfer efficiency and raw-volume print distribution.

Why AOI is a Must-have for PCB Assembly

04/05/2018 | Russell Poppe, JJS Manufacturing
AOI has an invaluable role to play in speeding up the process of PCB production, in ensuring extreme precision to catch even the smallest of defects, and in minimizing the potential for time-consuming and costly reworking.



Copyright © 2018 I-Connect007. All rights reserved.