Digicom to Showcase Methods to Improve Quality in the Electronics Assembly Process


Reading time ( words)

Digicom Electronics Inc., a technology and quality driven electronics manufacturing services (EMS) company based in Oakland, California, will present methods for improving product quality and integrity during the electronics assembly process at the Design-2-Part Show, being held in the Santa Clara Convention Center, Santa Clara, California, on May 24–25, 2017. Digicom will be in booth 331.

Improvement methods include Digicom’s proprietary Diamond Track Nitrogen and Diamond Track Cleaning services to reduce or eliminate defects in printed circuit boards, especially for mission critical products such as those used in the medical, military and aerospace, industrial, and RF wireless industries.

Digicom’s nitrogen initiative generates nitrogen for use during the solder reflow, selective soldering, and hand soldering processes to strengthen solder bonds and improve solder adhesion. Adding nitrogen minimizes device failures and ensures printed circuit board integrity. Digicom's Diamond Track Cleaning process is the result of years of research and experimentation, and has been proven to deliver significantly better than the IPC's ionic cleanliness guidelines' allowable level of contamination.

"A company's product quality, reliability, and reputation are often shaped by the contract manufacturer that company uses. Digicom's nitrogen generation and integration and cleaning services are two of the methods we employ to mitigate failure and produce success. Learn about others by stopping by our booth at the Design-2-Part Show, visiting our newly expanded facilities in Oakland, California in the San Francisco Bay area, or contact me at +1-510-639-7003, email info@digicom.org,” said Mo Ohady, general manager for Digicom Electronics.

Digicom helps companies with their complete process from design review through prototyping, component sourcing, manufacture, test, and process validation. Digicom is certified for ISO 9001:2008, ISO 13485:2003 medical devices quality, quality system regulation 21 CFR 820, and ITAR certification. AS9100 aerospace certification will be completed in June.

About Digicom Electronics

Digicom Electronics offers advanced electronics manufacturing with "Made in the USA" quality that fits the needs of larger enterprises while at the same time providing the benefits and individual attention needed to serve start-up companies. Digicom collaborates in all aspects of the process from the design for manufacturability to the final, fully compliant product. Material procurement and management services include planning, purchasing, expediting, and warehousing of components and materials. Digicom has ISO 9001:2008, ISO 13485:2003 medical devices quality, quality system regulation 21 CFR 820, ITAR, AS9100, and numerous other certifications. For more information, click here.

Share




Suggested Items

VJ Electronix: Automating the X-ray Inspection Process

05/04/2022 | Nolan Johnson, I-Connect007
VJ Electronix's Brennan Caissie shares the benefits of a new inspection tool that can be used on a variety of boards, with an automated system that takes the pressure off the manufacturing floor operators and can provide feedback all the way to the design process.

Dave Hillman on Living Your Passion

03/29/2022 | Barry Matties, I-Connect007
Barry Matties leads this engaging retrospective conversation with Dave Hillman, a Fellow, Materials and Process engineer at Collins Aerospace, who talks about mentorship, pandemic changes, and solder. “Soldering is soldering,” Dave says. “But how we do that keeps evolving in response to the new technologies and smaller packages.” What’s the key to his success and longevity? “Find your passion.” Here’s how he’s done it.

IPC’s Dieter Bergman Fellowship Award Presented to Bev Christian, HDPUG

03/14/2022 | Patty Goldman, I-Connect007
The Dieter Bergman IPC Fellowship Award is given to individuals who have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts and the electronics industry. Bev Christian is a facilitator for the High Density Packaging User Group (HDPUG) and an adjunct associate professor in the Department of Mechanical and Mechatronics Engineering of the University of Waterloo, Waterloo, Ontario, Canada. In the past 31 years he has held positions at Nortel, BlackBerry, and CALCE; all in the areas of materials and failure analysis. Bev has never missed an IPC APEX EXPO since its inception. He is a member of 27 IPC committees and attends as time and the lack of clones allow.



Copyright © 2022 I-Connect007. All rights reserved.