Indium Expert to Present at IPC Electronics Assembly High Reliability Technical Conference


Reading time ( words)

Indium Corporation’s Joey Qiao, Area Technical Manager for Eastern China, will share his technical expertise at the IPC Electronics Assembly High Reliability Technical Conference on August 18 in Ningbo, China. The conference focuses on reliability for both automotive and communications electronics.

Qiao’s presentation, Low Temperature Solders: New Applications and Challenges, covers:

  • Drivers for low-temperature soldering
  • Forecast on solder melting temperatures for SMT assembly
  • Low-temperature alloy applications, test results, and recommendations

Qiao is an Area Technical Manager for Eastern China. He joined Indium Corporation in 2015 and has more than 12 years of experience in the electronics industry. Qiao provides technical support for Indium Corporation’s electronics assembly materials, engineered solders, and thermal management materials for customers in Eastern China. Qiao holds a six sigma green belt and process failure mode effects analysis (PFMEA) certification. He is also an ISO-13485 internal auditor.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here.

Share


Suggested Items

Video from productronica 2017: Mycronic Discusses Precision Jetting Systems

11/17/2017 | I-Connect007
From the show floor during productronica 2017, Clemens Jargon, VP of Global Dispensing at Mycronic, discusses with I-Connect007 Technical Editor Pete Starkey the company’s portfolio of precision jetting equipment, with particular reference to the speed and versatility of the MYSmart series.

Solder Preforms 101: Ask the Expert

11/13/2017 | Patty Goldman, I-Connect007
At the recent SMTA International 2017 event, Jerry Sidone, product manager for the engineered materials at Alpha Assembly Solutions, speaks with I-Connect007 Managing Editor Patty Goldman about the voiding challenge, especially with bottom termination components, and how solder technologies from Alpha are helping PCB assemblers address this issue.

HDI Considerations: Interview with ACDi's Garret Maxson

11/10/2017 | Stephen Las Marias, I-Connect007
Garret Maxson, manager of engineering services at American Computer Development Inc. (ACDi), discusses the PCB assembly challenges when dealing with high-density interconnect (HDI) boards, parameters to consider, and strategies to help facilitate a smooth assembly process when using HDI boards.



Copyright © 2017 I-Connect007. All rights reserved.