Kurtz Ersa to Exhibit at SMTA International


Reading time ( words)

Kurtz Ersa North America announces plans to exhibit in Booth #335 at SMTA International, scheduled to take place Sept. 19-20, 2017 at the Donald Stephens Convention Center in Rosemont, Illinois. Ersa’s team will demonstrate the HR 550 Rework system, Ersa Mobile Scope and i-CON VARIO 4.

The HR 550 hybrid rework system features a 1,500W high performance hybrid heating element to desolder and solder SMT components up to 70 x 70 mm. A 2,400 W infrared bottom heater in three heating zones guarantees homogeneous bottom-side preheating of the complete assembly. The system addresses all users with the highest requirements in terms of precision and process safety in electronic assembly rework applications.

The i-CON VARIO 4 offers whisper-quiet air and vacuum generation for up to four simultaneously operating soldering and de-soldering tools. The station ensures highly efficient processing of all SMT and THT soldering tasks. In addition to the 200W i-Tool AIR S, it offers the i-Tool Universal Soldering Device, the THT De-soldering X-tool Iron, and the Ultra-Fine De-soldering Chip Tool VARIO (2 x 40W).

Ersa2.jpgThe Ersa Mobile Scope has been designed for optical inspection and digital image recording including measurements of solder joints on Ball Grid Array (BGA), μBGA, CSP and Flip-Chip packages. Further applications are top-view inspection of PCB lands, solder paste prints or the optical inspection of components on printed circuit boards in Surface Mount Technology (SMT) or in Trough Hole Technology (THT). The device can be used in quality control, production, laboratories or R&D departments.

For more information about Kurtz Ersa North America, click here.

Share


Suggested Items

HDI Considerations: Interview with ACDi's Garret Maxson

11/10/2017 | Stephen Las Marias, I-Connect007
Garret Maxson, manager of engineering services at American Computer Development Inc. (ACDi), discusses the PCB assembly challenges when dealing with high-density interconnect (HDI) boards, parameters to consider, and strategies to help facilitate a smooth assembly process when using HDI boards.

5 Simple Elements to Guarantee Outsourcing Success

11/09/2017 | Neil Sharp, JJS Manufacturing
Rather than viewing outsourcing as a way to offload unwanted tasks, OEMs should spend time carefully selecting and then maintaining a properly managed relationship with their chosen EMS partner. Here are five simple elements that you should focus on before, during and after an outsourcing strategy to guarantee it is a success.

Counterfeit: A Quality Conundrum

10/18/2017 | Michael Ford, Aegis Software Corp.
The rise in the ingress of counterfeit materials into the supply chain has made them prolific, though yet, the extent is understated. What needs to be faced now is the need for incoming inspection, but at what cost to industry, and does anyone remember how to do it?



Copyright © 2017 I-Connect007. All rights reserved.