Amerway Exhibiting High Purity Solder Products, Solutions at SMTAI 2017


Reading time ( words)

Amerway Inc. will be exhibiting a full range of premium solder products including solder bar, wire, fluxes, and custom alloys at SMTA International 2017, which will take place at the Donald E. Stephens Convention Center in Rosemont, Illinois, on September 17-21. Amerway will be in in Booth 1134.

In addition to their own premium products, Amerway also offers Balver Zinn Cobar Solder Products including the well-known lead-free SN100C family of alloys.

Amerway has also recently partnered with metals waste recycler Conecsus LLC to offer customers a 'cradle to grave' soldering solution, from Amerway high-purity soldering alloys and products to Conecsus waste recycling solutions for dross and other metals waste by-products from the SMT/PCB assembly process.

Balver Zinn Cobar SN100C is a nickel-stabilized tin copper eutectic, containing a small amount of germanium to reduce oxidation. SN100C generates bright and shiny solder joints, comparable with lead-containing solders. In 2005, NASA tests indicated that SN100C is the most reliable soft solder for wave soldering. SN100C is especially preferred for the higher process temperatures of selective soldering.

In making the announcement, Terry Buck, President, said, "Amerway Inc. recently awarded ISO 9001 quality certification, is pleased to offer Balver Zinn Cobar SN100C in addition to our own Amerway Inc. products. Our full range of soldering solutions, in addition to waste recycling programs with partner Conecsus, will be available in our booth at SMTAI this year."

About Amerway

Amerway Inc., based in Altoona, Pennsylvania, is a premier supplier of solder bar, solder wire, fluxes, and custom alloy products to the electronics manufacturing industry. Amerway manufactures a large selection of lead free alloys including pure tin, tin/copper, tin/antimony, tin/silver, SAC-alloys, fluxes, and more. Amerway Inc. has been recently awarded ISO 9001 quality certification, and now offers high-quality and high-purity Balver Zinn Cobar solder products such as fluxes, solder paste, and solder wire, including the SN100C family of alloys. For more information, click here.  

Share


Suggested Items

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Focus on the New

01/05/2018 | Stephen Las Marias, I-Connect007
It seems like it wasn't too long ago when I was writing about the optimism of the electronics manufacturing and assembly industry going into 2017. Now, here we are again at the beginning of the new year, looking at new trends, disruptive technologies, and emerging markets for 2018. I am also proud to announce our new branding as well as our fresh, new look.

Solder Printing Process Inputs Impacting Distribution of Paste Volume

12/14/2017 | Marco Lajoie and Alain Breton, C-MAC Microelectronics
The volume of solder deposition, like any process, has variations that may be characterized by a statistical distribution curve, whether normal or non-normal. As complexity, density, cost and reliability requirements increase, there may be value in narrowing the distribution curve. It is common sense that less variation serves the interest of quality of the more complex and dense circuit boards.



Copyright © 2018 I-Connect007. All rights reserved.