Ellsworth Adhesives Europe Now Offers New Robnor ResinLab Safety-Focused Resins

Reading time ( words)

Ellsworth Adhesives Europe has added two new safety-focused resins to its material range. Manufactured by Robnor ResinLab, GR100 and GR200 are completely free from hazard labeling, making them the safest resins the formulator has ever made.

GR100 is a two-part, low viscosity filling and jointing component, while GR200 is a cold curing elastomer, free from isocyanate or plasticiser.

Ideal for use in applications including electrical potting, cable jointing, off shore and low temperature potting, GR100 and GR200 are available to purchase in bulk, as a twin pack or as a kit and are guaranteed to offer end users a safer, more environmental solution than traditional resins.

Both products are easy to mix and pour, and cure at 0˚, ensuring good low temperature flexibility. By curing at a much lower point than traditional epoxies and polyurethanes, GR100 and GR200 retain some stickiness post-cure, a quality which could aid adhesion to certain substrates. These safety focused resins have fast gel and demould times – GR200 cures after only 1 hour while GR100 has a cure time of three hours. Furthermore, these materials enjoy the additional benefit of curing without exotherm, meaning that curing is possible in thick or thin sections.

GR100 is the softer of the two materials with a hardness of A10, compared to GR200 with a shore classification of A30–35. Thanks to their flexible property, the cured material can always be cut or dug out, enabling easy access to the protected components and the ability to replace the materials if required.

With a good tack and adhesion to plastics, good tensile strength and excellent electrical and water resistance, these new resins are set to be a popular choice in the market place. 

Ellsworth Adhesives Europe is an official distributor of Robnor ResinLab epoxy and polyurethane resin systems.

About Ellsworth Adhesives Europe  

Ellsworth Adhesives Europe is the regional arm of American owned global entity, The Ellsworth Corporation. Across Europe, Ellsworth Adhesives has branches in France, Spain, Germany, Scandinavia and the United Kingdom, where our headquarters is located.

As a distributor of adhesives, specialty chemicals and adhesive dispensing equipment, the Ellsworth Adhesives product portfolio is huge and encompasses all of the industry’s leading brands including Loctite, Dow Corning, Dymax, Lord and many more.  

From epoxy adhesives and potting systems, to conformal coatings and surface preparation products, Ellsworth Adhesives has a material to suit every application. Alongside adhesive materials, Ellsworth also supplies a wide range of manual and automated adhesive dispensing equipment including tips, cartridges and static mixers, as well as dispensers and dispensing robots.

To learn more about Ellsworth Adhesives, click here.


Suggested Items

Reducing Cycle Times with Innovative Bonding Solutions

10/23/2015 | Stephen Las Marias, I-Connect007
In an interview with I-Connect007, Gudrun Weigel, head of engineering and a member of the board at Delo, discusses the importance of cycle time reduction, and how the company is helping its customers address this issue through its innovative bonding solutions.

Faster, More Precise Jet-dispensing in Microsystems Technology

09/16/2015 | Delo Industrial Adhesives
As miniaturization advances relentlessly, the components that need to be connected are becoming ever smaller and more delicate. At the same time, quality standards and the functionality of the materials are increasing. This development requires joining processes that can reliably fix the smallest of components.

Copyright © 2018 I-Connect007. All rights reserved.