Tips & Tricks: What to Do if You Can't Have Reference Designators on Your Board


Reading time ( words)

The logical response to the question "What do you do if you can't have reference designators" is "Put them on the PC board." But the truth is, sometimes you can't have reference designators on your board. Perhaps it's because it's too densely populated and there isn't room. Or maybe, for aesthetic reasons, you've chosen to leave them off.

And with some products like development boards, it's sometimes necessary to use the space for instruction or functional identification, and reference designators would confuse your customers.

It's always best to put reference designators as close to the part as possible, and on the same side as the part, but if that's not possible, you can still create an assembly drawing. When laying out the board, put the reference designators in a different layer than the text you want in silk screen.

Then, create a PDF that has all of the component outlines in their place, with reference designators. Make one for the top and one for the bottom. You can call this document your "assembly drawing" and include it in the files you send in to be manufactured.

You might ask why PCB assemblers need reference designators when all the surface mount parts are machine assembled. First, any through-hole parts are hand assembled. Their locations and board side needs to be clear for the people stuffing them. Second, CAD systems don't always have 100 percent accurate information. If the center point of the footprint is off, surface mount machines will center the part where file says to put it, which could be the wrong spot.

The reference designators are also part of quality control. It's another opportunity to remove ambiguity. Ambiguity is bad. Certainty is good.

Share

Print


Suggested Items

Just Ask Joe: The Occam Process

08/25/2020 | I-Connect007 Editorial Team
First, we asked you to send in your questions for Happy Holden. Now, it’s Joe Fjelstad’s turn! Inventor, columnist, instructor, and founder of Verdant Electronics, Joe has been involved with rigid PCBs and flexible circuits for decades, and he’s ready to share some of his knowledge with our readers. We hope you enjoy “Just Ask Joe.”

The iNEMI 2019 Board Assembly Roadmap

06/01/2020 | Pete Starkey, I-Connect007
iNEMI continues to publish chapters of its 2019 Roadmap and recently presented an overview of its Board Assembly Roadmap Chapter in a webinar prefaced by Grace O’Malley, vice president of global operations. The new chapter is just the latest addition to this global effort from 23 working groups contributing expert input from all aspects of the electronics industry.

Greg Vance to Serve as SMTA Interim President

04/07/2020 | Nolan Johnson, I-Connect007
Nolan Johnson talks to Greg Vance about taking over the SMTA Board President's role through September. Discussion includes an update on multiple board chair changes, and an update on the board's work to achieve their current set of objectives.



Copyright © 2021 I-Connect007. All rights reserved.