PNC Inc. Invests in MIRTEC 3D AOI System


Reading time ( words)

PNC Inc. has recently come to an agreement with MIRTEC to purchase the MV-6 OMNI 3D AOI system. To be used in their assembly division, this purchased has bolstered their state-of-the-art equipment list even further.

The award-winning MV-6 OMNI 3D AOI machine is configured with MIRTEC’s exclusive OMNI-VISION 3D Inspection Technology which combines our 15-megapixel CoaXPress camera technology with MIRTEC’s revolutionary digital multi-frequency Quad Moiré 3D system in a newly designed cost-effective platform. MIRTEC’s 15-megapixel CoaXPress vision system is a proprietary camera system designed and manufactured by MIRTEC for use with our complete product range of 3D inspection systems. MIRTEC’s digital multi-frequency Quad Moiré Technology, provides true 3D inspection using a total of four programmable digital Moiré Projectors to yield precise height measurement data used to detect lifted component and lifted lead defects as well as solder volume post reflow.

Fully configured, the new MIRTEC MV-6 OMNI machines feature four 10-megapixel side-view cameras in addition to the 15-megapixel top-down camera. There is little doubt that this new technology has set the standard by which all other inspection equipment is measured. MIRTEC will have two MV-6 OMNIs on display, one configured with a 10um lens for high-performance applications and the other with a 15um lens for high-speed applications.

“With the volume of orders we have been receiving and the growth PNC has shown in 2017, we thought this purchase was the right step forward for next year,” explain PNC Inc. President Sam Sangani. The MV-6 was recently awarded numerous honors for its performance across the globe. This, in addition to other key contributors such as its efficiency and flexibility were some of the reasons PNC’s leadership decided on making this their next equipment purchase.

About PNC Inc.

PNC Inc. is located in Nutley, NJ and is one of the country’s leading providers of rigid, rigid-flex and flex PCB’s and the largest of their kind in the region. After adopting the Total Concept philosophy, PNC is now able to provide customers with PCB design, fabrication and assembly solutions all under one roof. They are a one-stop shop for all things related to PC boards. They are continuously expanding their extensive list of state-of-the-art equipment while maintaining a focus on energy and cost efficiency in order to provide the best product at the best price possible.

PNC Inc.’s ownership recently acquired Accurate Engineering Inc. in Sun Valley, CA. AEI’s primary focus is on high quality flex and rigid-flex PC boards for highly complex applications including aerospace and defense. Their customers include Northrop Grumman, Boeing, Lockheed Martin, NASA and Raytheon.

Share


Suggested Items

Tips to Improve Soldering Tip Life and Reduce Cost

10/10/2018 | Thermaltronics
Whether in production, or repair and rework, the cost of soldering iron tips can be easily overlooked, but with today’s requirement for higher temperatures in lead-free solder applications, the consumption of tips has dramatically increased. This fact, combined with changes in tip design to meet the higher thermal load requirements, has also resulted in escalating tip costs, making tip care a high priority.

What SMT Component Shortages Mean for Design and Manufacturing Engineers

09/13/2018 | Russell Poppe, JJS Manufacturing
Much has been written about the increasing shortages of electronic components such as MLCCs, chip resistors and other semiconductor devices. And the manufacturing industry is now seeing price increases and greatly extended lead times. It seems the situation is likely to get rapidly worse rather than better. What can we do? Read on.

RTW NEPCON South China: Mycronic Discusses Industry 4.0

09/12/2018 | Real Time With... NEPCON South China
At the recent NEPCON South China 2018 event in Shenzhen, Clemens Jargon, VP for Global Dispensing and Asia at Mycronic, discusses I-Connect007's Edy Yu the challenges that customers face on their journey towards Industry 4.0, and how Mycronic is addressing these issues. From jet printing to solder paste inspection, to pick-and-place, Jargon talks about their total solutions that aim to help customers take their production to the next level.



Copyright © 2018 I-Connect007. All rights reserved.