Virtual Industries Shows Small Parts Handling Systems at SPIE Photonics West


Reading time ( words)

Virtual Industries Inc. today announced plans to exhibit in Booth #1809 at SPIE Photonics West, scheduled to take place Jan 29 - Feb 1, 2018 at The Moscone Center in San Francisco, California. Company representatives will demonstrate the ADJUST-A-VAC ESD Safe Kit and TWEEZER-VAC ELITE.

The ADJUST-A-VAC ESD Safe Kit With ESD Safe Delrin Small Parts Tips and ESD-Safe Vacuum Tips (AV-6000-SP8-BD-110) was developed as a result of customer concerns about manual handling of very thin/delicate substrates, wafers, MEMS devices and other very fragile components. This vacuum-tweezer allows the operator to adjust the vacuum level from just below atmospheric pressure to up to ten inches of mercury depending on the fragility of the part being handled. 

An integrated ten segment bar-graph-display visibly shows the vacuum level present during handling operations. Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles. Kits are available in 110 or 220 volt operation.

The TWEEZER-VAC ELITE (TV-1500-ELITE) was developed in response to customer concerns about firmly grasping critical components and not dropping them due to a vacuum leak. This vacuum tweezer uses an integrated ten segment bar-graph display that visibly shows the vacuum level present during operation. Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles.

The TWEEZER-VAC ELITE is available in various kits depending on your handling application. Kits are available in 110 or 220 volt operation.

About Virtual Industries Inc.

Founded in 1987, Virtual Industries Inc. is headquartered in Colorado Springs, Colo. For more than 20 years, Virtual Industries has been a leading supplier of manual vacuum handling solutions to the world’s high-technology firms. The company’s patented ESD-safe products are used by CLASS I clean room personnel, electronics assemblers, semiconductor manufacturers, Universities and scientists globally. Virtual Industries’ success has come from developing innovative manual vacuum handling tools and pick-up tips based on customer requests and customer feed back. These tools provide customer specific solutions that make assembly and processing operations more productive and ergonomic. For more information, click here.

Share


Suggested Items

Rework and Reball Challenges for Wafer Level Packages

10/16/2017 | Lauren Cummings and Priyanka Dobriyal, Ph.D., Intel Corp.
Amid the growing trend in package and PCB miniaturization, wafer-level packages (WLPs) have garnered recent popularity for their affordable cost, small footprint, and thin profile. Component suppliers must be prepared to support failure analysis for PCB-assembled WLPs, including fault isolation, nondestructive screening, as well as destructive analysis techniques.

RTW SMTAI: MIRTEC on Staying Ahead of the Curve

09/21/2017 | Real Time with...SMTAI
Brian D’Amico, president of MIRTEC, talks with I-Connect007 Managing Editor Andy Shaughnessy about some of the latest 3D AOI challenges, including dealing with highly reflective surfaces of solder joints or wafer-level die, which make it impossible to characterize in 3D. He says it's not just plain SMT boards anymore, but an integration of wafer-level manufacturing, which they see as coming down more and more.

Industry 4.0: Implications for the Asia Pacific Manufacturing Industry

11/09/2015 | Krishnan Ramanathan, FroST & SulliVAN
Industry 4.0 refers to a new level of organization and control of the entire value chain, across the life cycle of products. Seen as the fourth industrial revolution, Industry 4.0 seeks to merge physical and virtual worlds. This marks a significant change in the level of complexity from the third industrial revolution, where electronics and information technology were used to automate production.



Copyright © 2018 I-Connect007. All rights reserved.