Zestron's Umut Tosun to Lead Pro Development Course at IPC APEX EXPO 2018

Reading time ( words)

ZESTRON has announced that Umut Tosun M.S.Ch.E., will instruct a professional development course at IPC APEX EXPO 2018. "Electronic Assembly Reliability—Meeting the Challenges of Today's Design" is scheduled during the PD25 session on Thursday, March 1 from 9:00 AM to 12:00 PM.

Electronics design and assembly continues to evolve in complexity and performance and at an ever increasing rate. Likewise, solder paste formulations have evolved yielding products that are halide-free, lead-free, and with low solids as in the case of No Clean pastes and fluxes. In order to meet the ever increasing reliability challenges posed by electronics manufacturing, significant developments have been made regarding cleaning technology. This course has been developed to address the electronics cleaning challenges and the latest cleaning technology trends.

Tosun is the application technology manager at ZESTRON Americas. As an active member of the SMTA and IPC, he has presented numerous technical studies at key industry events addressing critical cleaning challenges within electronics manufacturing. He has been an instructor at IPC sponsored Professional Development seminars, SMTA sponsored webtorials as well as numerous regional technical workshops. Additionally, he has been the recipient of awards recognizing his contributions to the industry.

For more information on this course or to register, please visit IPC APEX EXPO.


Headquartered in Manassas, Virginia, and operating in more than 35 countries, ZESTRON is the globally leading provider of high precision cleaning products, services and training solutions for the electronics and semiconductor manufacturing industries. With seven worldwide technical centers and the largest team of engineers focused on high precision cleaning, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal.

For additional information and to tour one of our unparalleled technical centers, please click here.


Suggested Items

Cleaning with Data

03/19/2018 | Barry Matties, I-Connect007
Tom Forsythe, vice president of KYZEN, spoke to Barry Matties about KYZEN’s new process control monitoring and data service. They discussed the drivers behind these developments, the company's focus on managing data, and how KYZEN plans to support an industry embracing more cleaning and Industry 4.0.

Manufacturability: Pad Relief and Mask Relationship to Solder Joint Volume

03/09/2018 | Ken Horky, Peterson Manufacturing
Electronic assembly thermal management has always been an issue but has become more significant as we pack more power and function into a smaller form factor. In recent years, the growing use of LEDs for illumination on a large scale has presented additional thermal demands.

RTW IPC APEX EXPO: Indium Discusses Fighting Solder Voids

03/06/2018 | Real Time with...IPC
Voiding has increasingly become one of the most critical challenges in the soldering process. In this interview, Christopher Nash, product manager for the PCB assembly solder paste business of Indium, speaks about how the company is helping customers address the voiding challenge.

Copyright © 2018 I-Connect007. All rights reserved.