Horizon Sales Heads to San Diego for IPC APEX EXPO 2018


Reading time ( words)

Horizon Sales' entire team, including representatives from its new division, Horizon Supply Group, will attend the IPC APEX EXPO 2018, scheduled to take place February 27–March 1, 2018 at the San Diego Convention Center in California. All Horizon team members are thrilled to represent an award-winning line up of manufacturers exhibiting at the show, and they have filled their schedules with meetings with eager customers. During the show, Horizon also will be searching for new lines and products to represent throughout the Midwest for automation, machinery, materials and supplies.

Horizon manages and sells to the mid-western states of: Michigan, Ohio, Indiana, Kentucky, Western Pennsylvania, Illinois, Eastern Iowa and Wisconsin. In business for more than 25 years, Horizon offers state-of-the-art equipment and supplies to its customers, helping them to achieve best-in-class status in their respective markets.

The SMT and electronic assembly industry is constantly maturing and diversifying. For 25 years, Horizon Sales has continued to stay a step ahead of that technology curve, so that when the time is appropriate for its customers to rise to the next level in their technology and manufacturing skill set, Horizon Sales is there and fully prepared to offer the solutions that they will need.

About Horizon Sales

Horizon is a manufacturers’ representative corporation and distribution group offering machinery and supplies to the electronics industry. Horizon manages and sells to the following states:  Michigan, Ohio, Indiana, Kentucky and Western Pennsylvania, Illinois, Eastern Iowa and Wisconsin. For more information, click here.

Share


Suggested Items

Modeling an SMT Line to Improve Throughput

06/06/2018 | Gregory Vance, Rockwell Automation Inc., and Todd Vick, Universal Instruments Corp.
One of the major challenges for an electronics assembly manufacturing engineer is determining how an SMT machine will impact throughput. Typically, an SMT equipment supplier will ask for a few products to simulate the throughput capability of their machine. Unfortunately, if the engineer works in a high-mix, low-volume environment, he may need to know the impact of a new machine on 1,000 or more products.

RTW IPC APEX EXPO: Indium's Brook Sandy-Smith on PMI-Squared

05/25/2018 | Real Time with...IPC
Indium Corporation's Brook Sandy-Smith discusses ionic process residues on PCB assemblies and introduces the concept of "PMI-squared" (process material interaction investigation), the topic of an IPC Technical Buzz Session at IPC APEX EXPO 2018.

RTW IPC APEX EXPO: Inspection Technology Developments

05/22/2018 | Real Time with...IPC
Brian D'Amico, president of Mirtec Corp., speaks with I-Connect007 Technical Editor Pete Starkey about the challenges of miniaturization, increasing component density, and the shadowing of small components by taller ones, and how Mirtec has developed its inspection technology to ensure they remain at the leading edge.



Copyright © 2018 I-Connect007. All rights reserved.