CyberOptics to Demo CMM Powered by MRS Tech at NEPCON China


Reading time ( words)

CyberOptics Corporation will exhibit in Stand 1F32 at NEPCON China, scheduled to take place April 24-26, 2018 at the Shanghai World EXPO Exhibition & Convention Center. Company representatives will demonstrate the new high-speed SQ3000 3D CMM, an extension of the MRS-enabled SQ3000 platform deemed best-in-class, along with the new MRS-enabled SE3000 SPI system. 

The new SQ3000 3D CMM (Coordinate Measurement) system, powered by Multi-Reflection Suppression (MRS) technology utilizes CyberCMM, a new comprehensive software suite for coordinate measurement. In a lab or production environment, the MRS-enabled SQ3000 CMM system is extremely fast and highly accurate, with repeatable and reproducible measurements for metrology applications in manufacturing of a wide variety of products such as PCBs, semiconductors and consumer electronics. 

CyberCMM, an extensive suite of CMM tools, provides 100 percent metrology-grade measurement on all critical points much faster than a traditional CMM – seconds, not hours – including coplanarity, distance, height and datum X, Y, to name a few. A fast and easy setup can be performed as compared to a slow, engineering resource-intensive setup that typically requires multiple adjustments with traditional CMMs.

The new SE3000 SPI system is the very first SPI system to incorporate the industry-leading MRS sensor technology with a finer resolution for the best accuracy, repeatability and reproducibility – even on the smallest paste deposits. Combined with the award-winning, easy-to-use software, solder paste inspection has reached a new level of precision for the most stringent requirements. 

About CyberOptics 

CyberOptics Corporation is a leading global developer and manufacturer of high precision sensing technology solutions. CyberOptics sensors are being used in general purpose metrology and 3D scanning, surface mount technology (SMT) and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of its key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe. For more information, click here.

Share

Print


Suggested Items

Co-owner Philip Kazmierowicz on New Role as KIC President

05/23/2019 | Nolan Johnson, I-Connect007
KIC is one of the leaders in reflow and thermal process control and smart oven technologies. On March 25, 2019, KIC announced that Philip Kazmierowicz, company co-owner, would take on the position of president. Nolan Johnson took that opportunity to sit down with Kazmierowicz in his Oregon-based R&D lab to discuss KIC's history and his plans for the future of the company.

Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 2)

05/08/2019 | Greg Smith, BlueRing Stencils
In the first part of this two-part article, Greg Smith talks about a study wherein a test vehicle was created to show transfer efficiency over a wide array of area ratios. Part 2 discusses the results of the experiment, including discussions of the different SEM results featuring the paste transfer efficiencies of each material, to better understand how the aperture wall surface smoothness compares to SMT stencil performance.

Catching up With Darrel Yarbrough of YES

05/07/2019 | Dan Beaulieu, D.B. Management Group
Yarbrough Electronic Sales (YES) is one of the fastest growing contract manufacturers in the Southwest. As people get to know them better, they are becoming the go-to company in their area. In this interview, long-time industry veteran Darrel Yarbrough, owner of YES, provides a background about the company, its capabilities, and his outlook for the industry.



Copyright © 2019 I-Connect007. All rights reserved.