Thermaltronics Launches TMT-HA100 Digital Hot Air Pencil


Reading time ( words)

Convection rework is becoming increasingly important due to the prevalence of surface mount components and the difficulty in using soldering irons to remove or replace such devices. To help overcome these difficulties, Thermaltronics, a manufacturer of soldering systems using the unique “Curie Point” Technology, has released a new, digital hot air pencil with adjustable controls for air and temperature. 

The unit features a 200 W heater, capable of providing a temperature range of 100˚C-450˚C and diaphragm pump, delivering 10 L/min. 

Various nozzle sizes are available, from 1.5-4.0 mm in diameter, making them ideal for fine-point convection rework of surface components. 

When the unit is not in use, there is a standby mode and auto cool process to cool the heating element and protect it from damage. Once the temperature has reached safe levels, the unit will power down and the LCD display will remain blank. Units are available in both 110V and 220V versions, and come standard with a one-year warranty.

About Thermaltronics

Thermaltronics is a manufacturer and supplier of a wide range of Soldering Products & Accessories used in the electronics manufacturing industry. Design and development is undertaken in the USA and Australia, with final production taking place in a customised manufacturing facility, incorporating specialised equipment and in accordance with recognised international standards of quality and compliance.

 In addition to the modern factory, Thermaltronics maintains an office & warehouse in New York State, commercial offices in Hong Kong and a Distribution Sales Office in Perth Australia. 

Thermaltronics embraces both strict quality control and conformance with International Manufacturing Standards, is compliant with ISO 9000 & ISO 14000 and holds certification in TuV, GS, NRTL & CE.

Product warranties are among the best in the industry and distribution of the company’s products is available worldwide.

Share


Suggested Items

What SMT Component Shortages Mean for Design and Manufacturing Engineers

09/13/2018 | Russell Poppe, JJS Manufacturing
Much has been written about the increasing shortages of electronic components such as MLCCs, chip resistors and other semiconductor devices. And the manufacturing industry is now seeing price increases and greatly extended lead times. It seems the situation is likely to get rapidly worse rather than better. What can we do? Read on.

Demand Forecasting: The Art of Knowing What You Need Before You Need It

08/17/2018 | Patty Rasmussen, East West Manufacturing
Forecasting is a skill born out of experience, intuition, and most of all, knowledge. But what do you need to know when you’re creating an accurate demand forecast? What data is needed? Are there tools you can use? Where do you start? Find out here.

5 Supply Chain Questions to Ask Your Assembly Partner

08/16/2018 | Neil Sharp, JJS Manufacturing
A key question for any OEM who may be considering outsourcing production is whether to maintain its existing supply chain or to hand those crucial purchasing decisions over to its assembly partner. This article highlights five questions to ask a potential assembly partner before handing over the responsibility for your supply chain management.



Copyright © 2018 I-Connect007. All rights reserved.