EMS to Demo Next-Gen Conductive Adhesives at Intersolar Europe

Reading time ( words)

Engineered Material Systems Inc. (EMS), a leading global supplier of conductive interconnect materials for photovoltaic applications, today announced that it will exhibit at the Intersolar Europa Solar Power Expo, scheduled to take place June 20-22, 2018 in Munich, Germany. The company will showcase its next-generation low cost conductive adhesives for stringing, shingling and back contact applications in crystalline silicon and heterojunction solar moduleThe EMS electrically conductive adhesive line features low cost products specifically formulated to meet the process and reliability criteria required for each solar module format. Materials designed for stringing and shingling are very flexible, will snap cure and fixture cells and ribbons in seconds at 150°C with enough strength to withstand module manufacturing processes.

EMS materials designed for back contact applications are very flexible and cure during the encapsulant lamination process. Materials also are available with different rheologies for different dispensing techniques: Lower viscosity (screen printing or jetting), medium viscosity (needle dispensing) and high viscosity (stencil printing). Electrically conductive adhesives are more stress absorbing than solder to withstand the rigors of thermal cycling and process at lower temperatures. EMS conductive adhesives are less than a third the cost of pure silver-filled conductive adhesives.

For more information about EMS’ low cost conductive adhesives or to learn how the company can define, develop and create an engineered material solution that is right for your company, visit our tabletop display at the conference or visit www.emsadhesives.com.

06/07/2023 | I-Connect007

Episode 5 of I-Connect007’s podcast, On the Line with… features an interview with Zac Elliot, Siemens technical marketing engineer, who discusses sustainability in logistics internal to the factory. Listeners will hear how ineffective logistics create wasted effort in the form of ineffective materials transfers, or increasing line down-time when materials are not flowing to the line properly.

04/12/2023 | Kelly Dack, I-Connect007

Guest editor Kelly Dack recently spoke with Phil McDermott of CHT. Phil gave Kelly a brief overview of the products designers, engineers, and manufacturers might need, particularly when it comes to thermal management.

04/05/2023 | Barry Matties, I-Connect007

During SMTA Dallas Expo 2023, Barry Matties spoke with Morgan Miller, field application engineer at Insituware, about the need for real-time measurement capabilities, like the Vision MARK-1 device offers, which is powered by analytical sensors, machine learning, and cloud-based technology to bring materials control solutions right to the factory floor.