Goepel electronic Updates SYSTEM CASCON


Reading time ( words)

Goepel electronic has updated its software package SYSTEM CASCON, which enables embedded JTAG solutions. The new version 4.6.8 features new techniques to more efficiently generate and execute test vectors for various applications—resulting in time savings and increased test throughput.

The new software version is optimized for the hardware platform SCANFLEX II, unlocking its full potential. Together, the system represents the most modern JTAG/boundary scan architecture on the market. It enables truly independent parallel scanning on up to eight TAPs (test access port) simultaneously with 100MHz clock frequency and full signal delay compensation. Particularly important for performance is the advanced SPACE III technology for data compression. Test procedures can be significantly accelerated with optimized SYSTEM CASCON control. This benefits complex RAM interconnection tests, massive SVF (serial vector format) based tests, VarioTAP Processor Emulation Test procedures and ChipVORX procedures for FPGA Assisted Test.

SYSTEM CASCON offers more than 40 tools for Boundary Scan/IEEE1149.x applications including Processor Emulation Test, FPGA Assisted Test, Embedded Diagnostics, Design Validation, Debugging and various in-system programming strategies. This allows the user to develop and run all embedded JTAG Solutions technologies in order to test and program complex designs with reduced physical access and on a single platform.

About GOEPEL electronic

GOEPEL electronic is a leading provider of innovative test and inspection solutions for printed circuit board assemblies (PCBAs) and electronic devices and systems. The company is divided into four divisions:

  • Automotive Test Solutions
  • Embedded JTAG Solutions
  • Industrial Function Test
  • Inspection Solutions AOI·AXI·SPI·IVS

For more information, click here.

Share

Print


Suggested Items

Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 1)

04/24/2019 | Greg Smith, BlueRing Stencils
As innovation and demand continue to drive miniaturization in electronics, manufacturers face the constant challenge of assembling smaller and smaller components with repeatable processes and high yields. Stencil printing is the first step in the PWB assembly process, and improvements to the SMT stencil can significantly improve yields, especially for more challenging miniaturized products.

Mentor and Seica Partner for Data Prep and Testing Big Boards

01/18/2019 | Pete Starkey, I-Connect007
Mark Laing, business development manager of the Valor division at Mentor, a Siemens company, and Luca Corli, director of sales at Seica, speaks with I-Connect007 Technical Editor Pete Starkey about the partnership between their two companies, which enables efficient data preparation for testing big boards, and accelerates new product introduction (NPI) cycles.

Solder Paste Selection/Qualification

01/16/2019 | Stephen Las Marias, I-Connect007
In a recent SMT007 survey, we asked the following question: " What are your challenges when it comes to solder paste selection/qualification?" Here are just a few of the replies, slightly edited for clarity.



Copyright © 2019 I-Connect007. All rights reserved.