Aegis on CFX and Hermes Efforts


Reading time ( words)

The Connected Factory Exchange (CFX) specification is truly revolutionizing the PCB industry. Michael Ford, from Aegis Software, met with me for an interview during the SMT Hybrid Packaging show in Nuremberg, Germany, to discuss the impact of this collaborative effort, and how it differs from the Hermes Standard.

Matties: You're the European Marketing Director for Aegis Software. Can you give us a quick overview of the company?

Ford: Aegis is a modern software company. There are a lot of MES software solutions in the market based on older software technologies. We saw that digital, Smart factories and Industry 4.0 were coming, and with the limitations of current technology in the market, we knew that we had to invent something completely new. As a result, our FactoryLogix solution is a true digital platform made specifically with new technologies, such as Industry 4.0 and Smart factories, in mind, which gives us the means to generate more value through the use of digital information within a factory. We help customers become automated and achieve higher throughput, even with high-mix, and higher quality. FactoryLogix really is the digital factory enabler going forward.

Matties: The Connected Factory Exchange, CFX, is something that IPC is really driving. I know that Aegis is a big part of that.

Ford: Yes, six months ago, I would have told you there were approximately 150 companies working together within IPC on CFX. Then, a couple of months ago I would have said 200. Now it’s 320 and continues to climb. The industry has woken up to fact that there is added value that comes from the accessibility of data. And it must be good data, which carries value and meaning.

It's been really satisfying to see these companies—who are basically competitors with one other, including competitors within the software side—working together to achieve a common goal in CFX. I think the industry has been constrained by the lack of openness of data. It's all very well to develop bespoke, customized interfaces and functions, which for a lot of companies has been a fact of life, but we've always tried to do things in a standard way, “out of the box.” The key word is standard. The more standard something is, the more value you get for anything that you develop or purchase. This is the whole premise of getting the industry to work in a true Industry 4.0 environment, or just a smart factory environment. To work smart, basically.

Matties: Now, CFX is an open-source project, right?

MFord2_Aegis_SMTHybrid2018.JPG

Ford: Yes. It's an IPC consensus-based standard, open to anyone to see or contribute to. The key area is that within CFX, we standardize the language that is being spoken by all of the machines, so that they can freely interconnect any machine with any other machine, “plug and play.” That's what brings the value.

CFX is a unique standard in this respect. In the past, we've had standards that transfer data from point to point. Even the latest IoT methods simply gather data and send it, for example, to a cloud, which is basically treating a cloud like it's data “landfill.” You're just filling it full of garbage.

With CFX, we're looking at it like a mobile phone. I can buy an American cell-phone, and somebody else can buy a Chinese mobile phone, and the two phones will connect to each other. It's a completely standard network and infrastructure, such that anybody picking up the phone will hear my voice.

But when I start talking, it's a different story. I don't speak Chinese and the person I'm talking to might not understand English. The language that’s being spoken also needs to be part of the standard, in order that the data can be understood. For example, if any of the machines on the shop floor want to transfer data between each other, there has to be a common defined language that connects them. This is exactly what CFX provides, which no other standard has achieved.

We have hundreds of messages within CFX that define the exact content of data that's going to be useful for all machine vendors, manufacturers, and system providers like ourselves, to create the next generation of Industry 4.0 solutions. Each vendor will need to use only a small selection of the messages, that are appropriate to his equipment.

Matties: When we start talking about CFX, some people that I've talked to think of it as a product that you buy—that it's a product IPC is bringing to market and they're going to make a lot of money off of it.

Ford: If CFX were to cost any less, I would have to pay people to take it, because it's free!  It's a consensus-based standard. It wasn't created by Aegis or any other single company. It was created by hundreds of different companies working together and it's being made available to everybody right now completely free of charge, from the IPC.

Matties: So, the standard defines how you bundle your data to communicate to the next piece of equipment or to the cloud, correct?

Ford: Exactly. It defines how you're going to get your data from your machine out there for people to utilize, and how other people's information is there for you to utilize, it is omni-directional

Matties: There's no software or anything that they have to purchase to take part in this?

Ford: No, not at all. The IPC have made it as easy as possible to adopt CFX, in the form of a Software Development Kit, which provides access to all of the messages within the standard. The SDK is also available directly from IPC, again completely free of charge, as part of the standard. It means that, for example, all the vendors taking part in the live demo today, with their 52 machines in all, had to do for this show floor demo, which are currently outputting CFX, was to embed this SDK into their machine software. Within an hour or two of development, machines were up and running and sending CFX messages out. Honestly, it could not have been any easier. We've gone to every effort to make sure that this standard reflects what people need in terms of the value it provides, as well as reducing the cost of implementation.

Matties: Another argument that I've heard is, "Data is a competitive advantage. Why do I want to standardize with the entire industry?"

Share


Suggested Items

ASM Assembly Solutions on CFX

07/16/2018 | Barry Matties, I-Connect007
ASM Assembly Solutions was one of the 30+ companies participating in IPC's CFX (Connected Factory Exchange) showcase at the recent SMT Hybrid Packaging show in Nuremberg, Germany. In this interview, ASM's Thomas Marktscheffel shared his perspective on CFX and its current challenges, and dispelled the notion that CFX might be a cookie-cutter approach to the smart factory.

Dave Bergman on IPC and CFX

07/03/2018 | Barry Matties, I-Connect007
The recent SMT Hybrid Packaging show in Nuremberg, Germany, marked the second opportunity for IPC to showcase its new Connected Factory Exchange (CFX) initiative. In this interview, David Bergman, VP for international relations at IPC, tells us more on the overall reception of CFX and the benefits users are seeing thus far. He also provides an update on what’s next for the open source standard.

West Penn SMTA: New Leadership, Same Commitment

06/28/2018 | Patty Goldman, I-Connect007
SMTA's new chapter president, Jason Emes, a quality engineer with Pennatronics Corporation enthusiastically discussed with I-Connect007's Patty Goldman the latest goings-on with this Keystone State chapter. He also spoke about his plans and initiatives for the SMTA West Penn Chapter.



Copyright © 2018 I-Connect007. All rights reserved.