Indium Features Solder Paste for Fine Feature Printing at SEMICON Taiwan


Reading time ( words)

Indium Corporation will feature its Indium3.2HF Solder Paste at SEMICON Taiwan 2018 September 5-7 in Taipei, Taiwan.

Indium Corporation’s Indium3.2HF is a water-soluble, halogen-free, Pb-free solder paste. Indium3.2HF formulated with Indium Corporation’s Type 6SG powder is ideal for fine feature printing applications.

Indium3.2HF offers consistent, repeatable printing performance combined with a long stencil life. In addition, Indium3.2HF delivers:

  • Good response-to-pause
  • A wide reflow profile window
  • Outstanding slump resistance
  • Excellent wetting capability
  • Superior fine-pitch soldering ability

From water-soluble solder pastes to ultra-low residue, no-clean fluxes, Indium Corporation has an industry-proven portfolio of products that meet the current and evolving challenges encountered in fine-pitch SiP applications.

For more information on Indium Corporation’s materials for SiP or Indium3.2HF Solder Paste, click here or visit Indium Corporation’s booth J2240.

Share


Suggested Items

Survey: Low-Temperature Soldering on PCBAs

11/14/2018 | Stephen Las Marias, I-Connect007
The majority of the respondents in our survey stated that they expect low-temperature soldering to result in higher quality PCBAs.

Investigation on the Assembly Process for m03015 and a Brief Look at m0201 Components

11/14/2018 | David Geiger, Robert Pennings, and Jane Feng, Flex
Components continue to shrink in the SMT world, and the next evolution of passive components includes m03015 (009005) and m0201 (008004). The m03015 and the m0201 components will see primary adoption in products that require further miniaturization, which would be SiPs. These modules would then be assembled into products through attachment, another assembly, or via other interconnect methods. This article explores the development of an assembly process (SMT only) for the m03015 component.

How to Avoid Common Wave Soldering Issues

11/13/2018 | Neil Blundell, Blundell Production Equipment
Wave soldering involves using waves of molten solder that act as glue to attach electrical components to the PCB. While this process is expedient and efficient in producing high-quality products, it sometimes experiences glitches that can be prevented or corrected. This article explores some of the main issues and how to remedy them.



Copyright © 2018 I-Connect007. All rights reserved.