VJ Electronix to Exhibit at SMTA International

Reading time ( words)

VJ Electronix will exhibit in Booth #1210 at SMTA International, scheduled to take place October 16-17, 2018 at the Donald Stephens Convention Center in Rosemont, Illinois. The company will demonstrate its industry-leading XQuik II with AccuCount Technology.

The revolutionary XQuik combines a unique imaging technology, offering the highest contrast and resolution, with the most powerful automated counting algorithm. The XQuik does not require any programming or library development for more than 95 percent of all components while providing the greatest accuracy for 01005 and smaller (008004). 

Available in two models – XQuik I for 7" reels and XQuik II for up to 15" reels – both models offer counting of Matrix Trays and Waffle Packs. XQuik II is now available with automated material handling for a substantial throughput improvement.

With hundreds of installations worldwide, the XQuik has been integrated with all leading MES systems and storage solutions. Offering much more than just labor savings, XQuik has a very strong return on

About VJ Electronix

VJ Electronix Inc. manufactures production ready, automated Rework and X-ray inspection systems with many advanced capabilities. The company frequently provides custom solutions tailored to satisfy specific application requirements. VJ Electronix is a worldwide leader in X-ray Inspection and Rework equipment. For more information, click here.



Suggested Items

Flex Circuit Supply Chain Challenges

02/13/2019 | Stephen Las Marias, I-Connect007
In our recent Flex and Rigid-Flex survey, we asked the following question: "Do you have problems with your flex circuit supply chain?" Below are just a few of the explanations of those who answered "Yes", slightly edited for clarity.

XR Update: Emerging Realities

10/01/2018 | Dan Feinberg, Technology Editor, I-Connect007
The rate of advance in the use of XR—the term now being used to cover AR (augmented reality), VR (virtual reality), and MR (mixed reality)—in many areas, along with advances in the hardware and network capability supporting the use of XR, is accelerating. And because things are moving so quickly, here's a quick review and an update on recent developments in this field.

Three Reasons to Use PCB Panel Routing Techniques

10/12/2017 | Duane Benson, Screaming Circuits
Most PCBs are individually routed—meaning they're not panelized. That doesn't mean that, sometimes, sending them to a PCB assembler in a panel isn't a good idea or even required. Generally, assemblers don't require panels, but there are some cases when they do.

Copyright © 2019 I-Connect007. All rights reserved.