Goepel electronic to Hold Free Webinar on 3D AOI Systems


Reading time ( words)

Goepel electronic will be conducting a free webinar, "3D AOI Systems: More Than Just Beautiful Pictures…" on Thursday, October 25, 2018 at 10 a.m. EST.

Current concepts of 3D AOI systems for the use in the electronics production will be presented in the first part of the webinar. On this basis, 3D measurement and test functions will be explained with real application examples and both advantages and limits will be shown.

The last part of the presentation will showcase an automated program and library generation feature which is possible with the captured 3D data of the PCB, combined with the software package PILOT AOI. This applies also to the allocation of required inspection tasks to the devices and the generation of library entries, as well as the definition of parameters and tolerances. This process will be presented on the basis of sample PCBs.

The webinar will show the latest of 3D AOI concepts as well as measurement and inspection functions. Furthermore, the opportunities of automated generation of inspection programs with MagicClick - making 3D AOI programming quick and easy, even for the most advanced and accurate 3D AOI system available today .

The webinar addresses quality and production issues and will be ideally suited to managers for electric assemblies, technologists and production planners as well as CEOs and directors of electronic manufacturing companies.

To register, visit Goepel electronic's "3D AOI Systems: More Than Just Beautiful Pictures…" event page.

About Goepel electronic

Goepel electronic is a leading provider of innovative test and inspection solutions for printed circuit board assemblies (PCBAs) and electronic devices and systems. The company is divided into four divisions: Automotive Test Solutions, Embedded JTAG Solutions, Industrial Function Test and Inspection Solutions (AOI·AXI·SPI·IVS). Besides more than 240 employees, who work in the company’s headquarters in Jena/Germany, Goepel electronic runs several support and service offices in the UK, USA, India and China. A worldwide distribution ensures the local and on-site support of Goepel electronic's products and solutions.

Share

Print


Suggested Items

Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 1)

04/24/2019 | Greg Smith, BlueRing Stencils
As innovation and demand continue to drive miniaturization in electronics, manufacturers face the constant challenge of assembling smaller and smaller components with repeatable processes and high yields. Stencil printing is the first step in the PWB assembly process, and improvements to the SMT stencil can significantly improve yields, especially for more challenging miniaturized products.

Mentor and Seica Partner for Data Prep and Testing Big Boards

01/18/2019 | Pete Starkey, I-Connect007
Mark Laing, business development manager of the Valor division at Mentor, a Siemens company, and Luca Corli, director of sales at Seica, speaks with I-Connect007 Technical Editor Pete Starkey about the partnership between their two companies, which enables efficient data preparation for testing big boards, and accelerates new product introduction (NPI) cycles.

Solder Paste Selection/Qualification

01/16/2019 | Stephen Las Marias, I-Connect007
In a recent SMT007 survey, we asked the following question: " What are your challenges when it comes to solder paste selection/qualification?" Here are just a few of the replies, slightly edited for clarity.



Copyright © 2019 I-Connect007. All rights reserved.